Search results

I've inherited a RRC project from a friend of mine as he cant get any joy out of it. Basically, even with a good alternator on it it wont charge the battery. I put a new battery on today and its running at 11.6 volts whilst idling. Now ive noticed that the rev counter doesnt work, and i read...

bought this and didnt need it, fuel pump seal WGQ500020 £10 DELIVERED FIRST CLASS RECORDED. any interest please email p w e t h e r h i l l@g m a i l . com ta

just to add i did this today with no problems, took a bit of wiggling in the engine bay and pulled the servo out towards the passenger side.

i went to the garage the other day and (unusually for me) i filled it up to the top. when i went to pay, on the way back i noticed that said fuel was pouring out of the bottom of the tank. i was driving down to the south of england, so i got a bit worried. after a few minutes the fuel gauge...

anyone?

hello everyone, just a quick question about the replacement of a brake servo on a freelander 1. do i have to remove the brake pipes from the master cylinder once it is unbolted from the servo, in order to gain access to pull the servo out, or can i get away without doing this? the reason i...

If anyone has a good brake servo for a freelander 1 for sale please contact me urgently. Thanks. Paul.

Is it genuine?

Balls to the above, just buy a seconhand propshaft. Shockhorror on here, you dont have to buy new. Just use a universal gaitor that look like it will fit. All its doing is holding grease in...

Petrol, yes, yes and yes. I think i may have sorted it, i noticed a small hairline crack in the thermostat housing, took it off and replaced it this afternoon and it seems to have done the trick. Is there nowhere else that water collects, say above the bulkhead etc? Im still confused as to...

Hi, no no water in the matrix pipework or on the floor. Filled it as per RAVE. It was fine past night with no noise - however today the noise was back. This is after a headgasket change.

Ive just done the headgasket out of routine on my freelander, replaced the thermostat and housing and drilled holes in the stat as i used to on almost all Rovers/MG. Did all the gaskets and replaced all the clips. The car is running fine, no splits, not overheating. I have noticed that upon...

Sorry its a 1.8xei, ill have a look in the heater pipework thanks mate

does anyone know what is the benefit / downside of removing the ballbearing valve inside the inlet on a k16?

Ive got a sloshing noise from the heater matrix area when i start the car, which im presuming is an air lock. I bled the system but by the morning it was the same - so i cam only presume something somewhere is letting air into the system and as this is the highest place in the system, the air is...

Yup IIRC, sorry i try not to use acronyms on the net that much. Trafficmaster: Original 4pin w/CD readout: Alternatively just bodgefit this...

R770 is the same as the one in Rover 45s, and no you cant find MPG or anything trip related through it. It only displays the CD info on the clock and it actually wont even work if it doesnt detect the clock plugged in. The only other option you can get is a clock with built in Trafficmaster IIRC.

I dont trust it, i once had my boy locked in the car on a morning while i ran into the house.

Is it a DI or a TD4? When you rev the engine do you have a rev limit at 4krpm?