Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. ATO

    200/200 injector pipes

    hallo..are the injector pipes on a 200tdi & 300tdi interchangable? If not can anyone give me the part numbers for the 200tdi pipes cos I can't seem to find them anywhere :confused: Edit - title is suppposed to say 200/300 doh
  2. ATO

    new rings

    I'm putting new rings in cos I've got a cracked no.3 piston. One of the cylinders has a small ridge at the top of the cylinder where the piston stops..whats the best way of getting rid of it? Cheers
  3. ATO

    deglazing cylinders

    I need to replace the piston rings on my 2.25, does anyone know what grit stone I should use for busting the glaze on the cylinder?
  4. ATO

    109 master cylinder fluid cap

    Anyone know where I can get one? Erm..my dogs eaten mine. I have looked everywhere, padds, cradds, ebay, etc..nowhere seems to have them. It's a bigger size (70mm width) than the standard non servo reservoir cap. Can't see why everyone has the smaller size but not the bigger size :confused:
  5. ATO

    2.25 Petrol driving me mental

    I keep getting (what I think is) oil over plug no.3 I took the head off, replaced the valve seals with good quality seals, lapped the valves in etc and cleaned up the head. Here's a photo of the plugs just taken out in order: http://www.ledgard.co.uk/images/plugs.jpg Valve guides do not appear...
  6. ATO

    Valve Guides

    Does anyone know what tool I need for replacing valve guides on a 2.25 petrol head?
  7. ATO

    New 750x16 Tyres

    Got four sets of four new 750x16s with inner tubes available on eBay if anyone's interested :) eBay.co.uk: 4 xNEW Land Rover 750x16 Tyres - Series 1 2a 3 Defender (item 330146124741 end time 21-Jul-07 12:57:23 BST)
  8. ATO

    Radiator flush

    Anyone know what colour STP rad flush is supposed to be? I bought one off fleabay for a couple of quid & when it got here the foil seal was broken. I'm sure the b'stard has used it, filled it back up with water, and sold it to me!
  9. ATO

    109 Hood Sticks

    Has anyone got 2 x side sticks for a 109 kicking around that they'd part with? I've only got 2 out of the 4 needed. :)
  10. ATO

    20w/50 oil

    is only £4.24 for 4.5L in Asda... for anyone who didn't know :)
  11. ATO

    5mb & 3mb

    Whats difference does it make to the cylinder head if it's 5 or 3mb? :confused:
  12. ATO

    Cracked head

    I changed the Head Gasket on me 109 recently cos there was 'mayo' under the filler cap and on the dipstick. The engine performance improved a lot & all was well. That was about a month ago and all has been fine with the engine up till yesterday until I took the filler off and there is mayo...
  13. ATO

    Bond Style 109

    I'm thinking of a few modifications to my 109....007 style. So: Does any one know where I can get some rocket launchers that would fit inside the wings? I'm thinking pop down headlamps and a big red button on the dashboard. I'm also after those spike jobbies that come out of the hubs? Do I have...
  14. ATO

    No electric!

    When I turn the key on me 109 there is no sign of life..I don't know much about electrics at all, can anyone help?! When it first happened last week I noticed the main alternator wire had melted to the other two and all were shorting on the engine block, so I have replaced it. But there is...
  15. ATO

    Alternator Main Wire

    Is 27A ok for this or does it need to be more? Not that clued up on electrics..:o
  16. ATO

    Spade Connectors

    Anyone know where I can get 11mm spade connectors for the back of my alternator? The wire connects at a 90 degree angle. The main alternator wire has melted and I'm making up a new one - only thing is the spades are so old I can't reuse them & I can't find any on t'interweb.:confused:
  17. ATO

    750x16

    Is 750x16 exactly the same size as 750R16? I'm replacing the tyres on me 109 and it's getting a bit confusing!
  18. ATO

    Induction Manifold Joint Washers!

    another daft question from me.. I'm just refitting the exhaust/induction manifold and I got the long silver manifold gasket ready to go. Now, I've also got 2 x joint washers for the induction manifold only. Do the joint washers go on with the manifold gasket as well or is it either or? The old...
  19. ATO

    oil pipe to cylinder head

    Y'know the bits at the front and the back of the cylinder head that are used to lift the engine out (don't know what they are called. handles?!)? Well the one at the back is bent round badly enough to stop me getting the oil pipe off the cylinder head. My question is can you just take it off? or...
  20. ATO

    Exhaust Bolts

    Evening! One of the bolts that connects the exhaust to the manifold has just sheared off while I was undoing it. Anyone know where I can get them? or the Part Number etc. :o
Back
Top