Search results

hi guys i have just fitted a bran new full clutch kit on a 200tdi engine. this came complete with the clutch pressure plate thrust bearing and clutch arm. cost £100 all in. i also renewed the spiggot bearing. now after a week of it being on the vehicle when i press the clutch pedal down there is...

i do a lot of off roading and just want more pick up from stand still. also to help when towing my car trailer. ive done all the pump adjustments and altered the waste gate adjustable bar. did that sometime ago and made a great diffrence.

sorry the waste gate will deal with excess build up of pressure.

hi martyn . idont know i know nothing on how boost works. i now how to rebuild them which ive done and the idea was a friend who recommended to up grade turbo boost. as he said it would give more power but said i need a dump valve. this is y im on here asking the question for the right advice as...

hi this is what im doing i have a 200tdi fitted in a rangerover classic bobtail. now i have rebuilt the engine and i have staged the turbo by putting a bigger compressor wheel in. now im told i need a dump valve to release turbo build up pressure. so ive brought one for a td5 off ebay as the...

yes it has 3 wires going to sender and when i earth the cream wire out it brings it on but wen connected to the sender nothing

hi all i have taken my fuel sender out of my 87 defender. there are 3 wires that go to it and i have taken the one off that operates the fuel light and earthed it down and the light comes on. but wen i connect it back on sender it dont work. i cant see any break in the connection and cant really...

what normally happens for it to stop working.is it more likely to be a bad earth.

hi all can some one tell me .can i get to the fuel sender by removing the drivers seat. on a landrover 90 1987. as the fuel light dont work.

yes thanks for all your advice. i did think its probably a bit of a job. also are they 10 spline as i might look for a good second hand one.

hi guys. i have a lot of play in the rear axle on my 90 defender 1987. is it right i can take the diff out and take up play by adjusting something on the crown.

what would you want for it regards paul

hi guys i have a landrover 90 1987. its got the ltt 5speed manual box and when im driving i go to select 5th gear but it just makes this high pitched noise it just wont select 5th. but if i turn it off it will go in then. all the other gears are fine what could it possibly be and is it hard to...

hi would ant one know the head torq settings for the head bolts on a 89 200tdi disco. plus also need the valve settings please.

you all know what i read on here a few weeks ago aguy who put a genuine question on here and all you dim wits did is ripped the **** out of him.well guess wot this question ive put on here was a total wind up and its great to see how every one as just ripped in to it.from are you on drugs to his...

yes i think i will go for bigger intercooler. tweak the fuel better injectors. have the head gas flowed and then get the bigger turbo. that should do the job .

just asking the question then saint v8 my m8 has a large intercooler now would this make much diffrence as ive always thought they were a waste of time.

trial and error is the way forward if the result is good and works i will let you all know the out come. will load a video of it on here when its done if i dont blow the ****er up.

ive always wanted to get more power. so my friend who builds turbos suggested this to me.he said normally you would bore out the bores to suck more volumes of air in but this way by up grading the torbo you push more air in which is a cheaper and not so much work to do to achieve good results...

i got a friend who is doing the work on the turbo by putting a bigger impeller in to give more pressure into the cylinders .he said it will go like stink. but he said i need to put a dump valve on as if i dident the pressure would just build up and then bend the conrods if it cant blow off . so...