Search results

Thanks for the info, that makes perfect sense... Where is the best place to find such a sensor ? Would Europarts have this over the counter or do I need to go to onine specialist supplier ? Thanks.. Stu

Hi, Got a problem that is getting worse as the temp is dropping.. My P38 RV8 (1997) is Hunting when cold and also the revs are so low it's barely registering on the tacho. The colder weather has dropped the revs to this point it was ok at around maybe 300 while cold before. Typical day right...

I am confused as to the inlet ? not sure how to get anything into the inlet at all ... :confused: Spark plug out maybe, chuck some stuff in ? Thanks, Stu

Hi folks, I have been driving long enough to know the sound blowing manifold gaskets make, problem is that both sides seem to be blowing. I have taken off one drivers side heat shield to have a look but can see no obvious signs of a blow ! Its certainly not the joint from manifold to the...

Faultmate ? There's my problem, I have no idea what that is, where to get it or even if I can get it... I assume its either a program for your laptop or only available at a Landrover dealers ? Sorry, I am used to older cars ! Stu

Thats great news to get there in the end, I am thinking my Hevac is the fault too. I get control of the system for a while then one or both blenders stop responding to changes and of course book symbol but I have not actually done anything about it yet as I've just got a Series 2a that needs...

I got a whole new Distributor including cap and rotor arm.. I just can't see how myself and a professional mechanic could both fail to get it right... I will see what happens with the next one... it thats no worky then its a fault thats developed since taking out the old one. Stu

Still looking for some wisdom on the above post please... Stu

Hi Folks, 97 V8i Es Auto: I had an issue with the distributor, the disco was running rough and I was 80% sure it was the dizzy, So I got a nice new shiny one from eBay, came with a 2 wire lead that plugs into the 3 terminal connector, all supposed to fit fine... Well I am stumped, set to...

Hi, My lovely 1996 newly purchased P38 hunts on start up when warm, but not from cold. Once you pull off the hunting disappears completely and there's no issues at all. Turn the engine off and bakc on again and it will hunt ? I have sprayed the pipes etc with carb cleaner and found no leaks, I...

I have been playing some more and have now noticed there is no set pattern to the fault other than igntion off and on again re sets control for a short while. Both blend motors now seem to be playing up after a few minutes, I thinking its not the blend motors at fault at all but something that...

Who would do that ? :) I put a Stoploc on the steering wheel once without having the key for it.... :eek: Stu

It stopped raining for 20 mins so went and had a play :p Actually do get control off temp on the passenger side for a while, got it hot, then cold, hot cold for 5 mins then it went hot and stayed hot... turned off and on again, had cntrol again... I am thinking maybe a sticky blender due to lack...

Hmmmm mine is same problem but other way round.. I can control and change drivers side temp no problem, but the passenger is always hot, no change at all when a/c used or temp control up or down. Think a/c is not actually working either but could need re-gas. Could be a little warm in the...

Cheers Stem, if it ever stops raining I shall have a look ! Stu

Bmec, Bcem... what does it all mean ! :confused: I am picking up my newly purchased RR tomorrow and it has this fault too. Drivers door won't lock/unlock with the fob (all others do) but does with the key. The central locking works when sat inside the car and the knob is pressed down. What am I...

Hey Gavo ! Looking forward to tomorrow, I am insured, cash in pocket..... Stu

I am no expert but have had this myself with the hunting, I would clean the stepper motor for starters and maybe get a cheap second hand MAF meter too from the bay... just my 2cp Stu

Hi, Just ben searching the forum and found this thread, my '97 ES V8 Auto has just refused to turn over on the key, relays are clicking but nothing at the starter it seems. I left the igntion on and put 12v direct from the battery to the solenoid and turned over and fired up ! Then it will...

Thanks for the info guys, I have taken the plug off the pump itself for now as I am a little concerned about random abs kicking in and not letting me stop where i intended especially as people look at me and think "he's got a nice face I'll assume he will stop and let me walk in front of his...