Search results

That was my point, I will buy the Comma oil again :) The assumption is that it's a TD5 auto as the thread is tagged "disco 2" and I am probably wrong about the service intervals, I always over service anyway.

I did mine last year and I used Genuine LR stuff it was expensive but I figured that as you only do it every 90,000 miles ish then it was worth it...... 4 mths later she blow a cooling hose and dumped all that expensive oil all over the road, so I used cheaper Comma fluid to fill the box up...

All your questions answered by clicking below :) www.discovery2.co.uk / Automatic Gearbox Oil and Filter Change

Deek, I have never used them but I got my disco from a garage in Edinburgh and they put it to them to have the cylinder head gasket changed before I picked it up. And 6 weeks ago I had to put a new cylinder head on as they had reused the old head bolts which worked loose and allowed the head to...

Well I am certainly getting my moneys worth from my RAC membership (and I cant fault them at all, excellent service :)) I had to have the old girl recovered from the M6 due to the three amigos and a collapsed bearing :( I have a question that I hope someone can help me with. According to rave...

I am just outside Stonehaven, but only for another couple of weeks / months until the house is sold, as we are moving to the Manchester area. although France would be nice :)

Thanks Big Lad :) I knew their was a difference but its between a Defender and Disco not Auto / Manual.... Every days a school day :o

This is an interesting reading :) Please correct me if I am wrong but I seam to recall that the auto was 135 bhp and the manual was 123 bhp?? as I say please correct me :confused:

It sounds like the cooling system is being pressurised by the exhaust gasses, so it will probably need the head gasket replaced.

If its got pressure when you loosen the cap when it's cold then I would suggest a head problem of some sort . If you open the cap to ensure their is no pressure when she is cold, then go for a run and get her up to temp and let her cool properly say overnight, if you have additional pressure...

Well the story continues, after the HG had been changed she still overheated on the motorway while she was towing the caravan :-( RAC recovered her to my local LDS & my fantastic sister-in-law lent us her car so we could still go on holiday :-). So the head is knackered, so new one ordered...

Well she is ready now :):) Apart from the head bolts being loose, the LDS in Edinburgh had also left part of the plastic dowel in the block and just put the new steel dowel on top which was also preventing the head from sealing against the block properly, oh and the bolts were several MM longer...

Well hopefully she will be back tomorrow :-) long story short When I got the car in April last year, the HG was done by a LDS in Edinburgh?? I found the invoice in some paperwork, no head bolts on invoice!!!! So I now have the situation that I have to have the HG replaced 15 months later because...

Ok so it's not the cap :( the new gasket and head bolts arrive tomorrow so hopefully get her back on Wednesday. I really hope it's just the gasket and not the head.

I think that the cap is OK?? I went for a run and the cap was hissing and misting a little, but when I loosened it the pressure was released in one go and if it hadn't been for the coolant loss I would have been scalded for sure. so I am thinking the the hissing from the cap is due to an excess...

Absolutely positive I did, but I will "double check" and run her again tomorrow. :-)

Just a quick up-date, I went for a 120 mile run. I have lost 2 Liters of coolant and the rad is full of air and cold :-( so it must be the head, I am hoping that it's just the gasket and not the head. Can I ask is it a difficult job I.e. do you need special tools like an engine lift. Or if I...

Well I changed the pump tonight, Went for a wee run and the Rad is toasty hot :) I will take it for a long run tomorrow and we will see what happens.

cheers, I will drain it and refill following that procedure tomorrow. and let you know :) I hope it's just trapped air and not a new pump!

Good evening all, I am looking for some help please, my TD5 auto has been loosing coolant, the temp gauge has hit max a couple of times, once under load and once in slow moving traffic, So I decided to investigate. I noticed that the top hose is hot but the radiator is cold. So I removed it and...