Search results

Has it got the radio remote switches on the dash binnacle? Also, what colour is interior? Blue or beige? Alan

you have pm from me Alan

Could I use the Td5 parts?

I have ESR2297 standard front non cat pipe, ESR4526 mid box and ESR4527 rear pipe. The mid box appears to be about 5" too long

yes. it is a factory 300tdi, but i am building it on a new chassis

Hi there, I want to fit a new exhaust to my 300tdi 90 which has a td5 rear tank. I bought the mid box and rear pipe suggested on forums and in microcat, but it does not appear to fit correctly. It appears to me like the mid box is too long and is hitting against the vehicle A frame. Has...

Thanks for this. I will try it :) Here is some more info in the meantime Hi there. My disco is a December 1995 (96 model year) 300 series ES V8i which I have since retrofitted (NO WIRES CUT!!!) with a 300Tdi from a 1995 GS vehicle. So now it's a 1996 ES Tdi :) The error on the diagnostic...

Hi there. My Discovery ABS Light stays on. When I had it connected up at the dealers it says that the pump power stays on after vehicle stopped (or something like that) Do I need a new pump or what is the most likely problem? Could it be a fuse or a relay or something? Alan

There is a white plug with approx 9 wires in it and a brown square plug with about 4 in it. Then if you have aircon there is a yellow relay in the drivers kickwell. Pull that out and thats the loom free. Hope this helps Alan

I don't beleive so, but I have downloaded LOADS of different manuals and have bought a haynes and have autodata at work. Still no luck :(

Hi all, I have a 1996 Disco 300 series V8 Manual ES model and I am converting it to 300Tdi Power. I have the engine mounts changed, the gearbox changed, the slave cylinder changed, the petrol engine loom disconnected and removed, the propshafts changed, the suspension changed and the exhaust...

Thanks for the help. I seem to have partly succeeded now in the fact that I now have the tailgate opening and closing 98% right (prob as good as it's gonna be) All I need to do now is fit the bottom seal. I think the tailgate will need to be raised up slightly and I have it slid up the hinges...

Send me a link to some pics mate

Hi there. I have a 1989 Range rover classic fitted with Aluminium top tailgate. Anyway. The seal on it was buggered and so I bought a new one and can't get it to fit on right. Even after shaving the rubber blocks down with a grinder it STILL won't let the tailgate close. Also, the tailgate...

Unfortunately, I don't see the rivets. I am talking about the outer - vinyl covered - "D" post trims. I see where they are screwed on in the boot void but cannot see where the outer bits are screwed or riveted on. It looks like they are bolted and the back window has to come out to let u work in...

An answer of actually how to do the job properly would be handy :)

Hi there. I want to remove the rear D pillar trims on my 1989 classic to do some welding and also remove the rear wings for inspection and a repaint. How?

Hi there. I have always been a landy fan and currently own 4 series III vehicles. I have recently bought a new RIB boat and don't much fancy driving 40 mile journeys in my SIII county with it on the back, nor do I think my great wee focus TDCi would be up to the job of pulling it up a slimey...

Hello! I am currently nearing completion on a full restoration of my 1982 SIII county petrol and am going to change the cylinder head today. The only problem which i am facing is the fact that I had a spare head lying around which I have fully reconditioned and had the seats hardened in which...