Search results

Hi, Appologies if this is in the wrong area. Due to an illness my 90 ( 200tdi) has been sat in the garage for about 2 years and unsurprisingly the optima batteries ( yellow & red ) that had been fitted have died, I have tried to recover them my to no avail, i used a lorry battery borrowed...

Hi all, i have a leaky landy, and before you all jump on me saying thats normal, i would just like to point out that if leaks can be cured imho i think they should be. The landy was in recently for an MOT which it passed but with several advisories which included an oil leak in the engine bay. I...

Hi I have a 90 with a disco 200tdi transplant. It has recently had some work done on it in a land rover specialist after being off road for nearly 3 years with electrical issues. I also has front and rear ARB locks fitted. Now when i drive it above 40mph and then either put the cliutch in or...

Hi All I am in the process of upgrading the instruments on my 90 from standard to TD5 type. I have all the bits except for the fuel tank sender and cable to the gauge. I have been looking everywhere i can think of but cannot get a definitive answer as to whether i need to change the current...

Hi I am looking to upgrade my standard 90 ( 1989 ) dash and instruments to TD5 type. Can anyone help? i've been trawling ebay and so far only found the loom. Cheers

Hi All Quick question regarding what is required for an MOT. I have a 200Tdi but the Indicator light for the glow plug timer is not working. Is this needed for the MOT?? thanks

Hi Anyone got one of these fitted ( Terrafirma RTC Steering Damper ) ? I bought one some time ago and like a lemon have lost the fitting instructions!! I have emailed Terrafirma but they have not replied yet. Any help, with photos if poss, would be appreciated. Rgds Kev

Hi all I am in the process ( still ) of rebuilding the old 90. Almost to the point of buttoning up the engine and underfloor area when i noticed what appears to be a gasket. Now before you all jump on me i know it is not the best photo in the world as i wanted to show the degradation rather...

Hi I've been ( slowly) rebuilding a 90, after converting from a van to a cab type, and basically taking on a lot of improvements along the way. The biggest issue i have had was with the electrics as the loom was a real mess of DIY by previous owner(s). So out came the split charger, central...

Hi All Appologies if in the wrong section !! Just wanted to see if anyone has had this done to their Landy. We are in the process of opening a dealership for Line-X Coatings in Hampshire and would welcome any comments from existing or potential customers. Rgds Kev

Hi guys Can anyone help with the colours used on an AMR2352 bulkhead loom? ie what connector does what and what the individual wires would feed etc? Also what VIN / Model it was originally designed for. Any coloured wiring diagram(s) would be greatly appreciated. rgds Kev

Hi Looking for a Defender 200-300Tdi Dash/Console with all the securing / fitting points intact. Does not have to include instruments but attachment points must be good. cheers

Hi Hopefully posted in correct forum Bit of background - I bought a Q plated 90 van a couple of years ago which was supposed to be ex-military ( turned out not to be ), with a Disco engine transplant. Anyway i wanted to convert from the van to a cab/pick-up which has been done along with...

Appologies if posted in wrong place. I'm looking to replace the rear ( and front if available ) axles on my old 90 with TD5 or 300TDI axles. I would like 24 spline and must be in good condition and preferably complete. I'm based near portsmouth in Hampshire but without transport to get further...

Wanted - RRC 86-92 complete front axle in good condition Hi I'm looking for a RRC 86-92 front axle complete if possible in good condition. I live at southern end of A3M near Portsmouth so would prefer items near to that area but may be able to collect from further...

Hi I'm looking for a RRC 86-92 front axle complete if possible in good condition. I live at southern end of A3M near Portsmouth so would prefer items near to that area but may be able to collect from further afield. PM with details and prices. Cheers Kev

Hi i have been trying to find a part number for the missing bolt shown in photo2 ( photo 1 for comparison on drivers side). If anyone can help it would be greatly appreciated as i would like to fit this before re-assembling radiator. cheers Kev

Hi Can anyone who has done the disco 200tdi conversion possibly help with info on the o-rings found at the radiator end of the oil cooling pipes? I think i may have lost one whilst replacing the radiator or at least there is only one left on one pipe end!!! can't seem to see any refference in...

Hi all I had to change a UJ on my front propshaft recently and after a lot of cussing and severely scraped knuckles:mad: i managed to get the job done.:) However, due to the state of the bolt heads and nuts being ( previously) slightly rounded and now a lot more rounded i would like to replace...

Hi Does anyone know where we can buy P78-3498 Donaldson filters for housing unit FGP07-0135 ?? Cheers Kev