Search results

Going to be moving in the next few months, Back to the loverly North West.:):):) Def 90 (otherwise known as Red is coming too. Problem garage is about 4 inches too low. anyone ever made up a set of 'small ' wheels that dropped the height by 4 inchs so I can fit them and then get it in the...

A mate ha a 90 with a duff rear diff, I have a three hole flange diff (early disco I think that looks Ok on teeth and a lot tighter than duff one) Only prob is 90 diff has 4 holes for prop and a four hole double UJ rear prop Can we just swap the flanges over, if we do are there any spacers etc...

Anti Roll Bar Mounts ( Rear) on Defender 90 (1997 R)) I want to fit anti roll bars to the Defender. Front of chassis has mounts (as per Discovery) so no problem there Rear Diff casing has joint mountings but there does not appear to be a suitbale mounting on the chassis. The only place that...

Looking for some gearbox stuff anyone had any dealing s with Ashworth Engineering in Luton any feedback

Help Urgent suggestions needed Suppposed to be going to Yorkshire this weekend for a weeks green laning came to work this am and just as slowing down for entrance to car park from 40mph HUGE very loud grumble from somewhere. If you imaging VERy noisy tyre then its similar but louder. All...

Defender 90 R (97) changing the stereo over (after doing the soundproofing) and I find that there are no from speekers fitted under the grill and the cables have been pactched to the set of rear speakers above the rear door. Well one of these works the other show 3.7 ohms but no sound output...

Well I have the oil and am ready rready to change the gearbox oil. However I can't find a socket or drive to fit the level nut. It looks like a T50 but its bigger. Anyone any idea Thanks TH

Defender is running Ok now, Two mods in progress EGR removal and CAT removal. Anyone know how to get rid of the smell of dog from the heater. Yes I know remove the CAT and the dog with follow. But seriously I have a long trip to do this weekend, and would like to have a Defender (now known...

Hello all, New to Defenders (1997 Defender 90 Tdi)New Toy :) but had a Disco 1 for 3 years. Anyway, When turning right grumbles from left hand side front wheelarch area, OK in a straight line and OK going left. Diagnostics, is it a wheel bearing? No Clunks or clicks just grumble. If so, do I...

Hi guys A friend whats to get rid of a project series !!! V5 says it was fist registered in 1973, but is it tax free?. Is there someone who could check the chassis number, and what does it cost? Thanks Tinhat

Well now the SRS is sorted out, now have another issue. On the way back from north Yorkshire the other weekend, the old girld decided it was a good idea to start wandering. Appears that it only happens on the inside lane of the motorway or where there is an odd change in the camber of the road...

I have recently done some serious milage in North Yorkshire and the pads and discs on the front are showing signs of a need to replaced. and in any case the Mot is in June I note from Haynes that solid or ventilated discs are fitted. But it does not advise if there are thickness difference or...

HELP Well the SRS light is still flashing. Found someone who says he can reset it, but we can't seem to find the connector!!!! Also its not too clear what shape colour etc the connector is supposed to be. Its a 1995 Disco 1 2.5 litre Deisel in ES form. We found a spare plug under the passenger...

Hello guys, hope someone can help I recently changed the battery on my Disco 1, wanted to fit the heavy duty one rather than the light weight version. In the course of this I discovered that there was 9what I thought was a relay screwed to the battery carrier platform. I unscrewed this and...

Hi guys and Gals, Ftrying to get my rear wiper on a Disco M reg (94) to work. Originally the wiring from the switch had been cut and the supply used to feed a CB radio!. I managed to sort this and have reconnected the wiring to the switch and reconnected the switch. I still had rear washers but...

Bit of advice please guys, Had trouble disengaing the diflock a couple of weeks ago. But managed it in the end. 250 yards in reverse I now appear to have an odd 'clunk/Thud' at the rear end when not being smooth with the gearchange!! also if I select reverse and don't soft shoe the clutch...

I'm trying to locate some missing articles from a land rover magazine during 2010. I did not find my disco since They are related to Disco 1 refurbishment. The first one I saw was in December 2010 edition and it looked like there were 4 previous ones. I tried the archive otpion from the mag...

I had a mishap- with the Disco , backing it into a tight spot and managed to damage the rear light cluster on the passenger side. This has destroyed the red , white and yellow lenses. A mate has given me a rear lampcluster from , reportedly a Disco 1. however this does not have a yellow lens...

Hi guys, got a replacement lift pump, just taken the one out the box and it appears to have two straight pipe tubes rather than the banjo connectors ! Is this a pattern part and a suitbale replacement or are different styles fitted to differetn engines? Thanks:(

Help, Driving home in the snow from Northold to Herts yesterday aboiut half way home the indicators started flashing. It appeared all on thier own. I did have a passenger at the time and we were driving from 13:30 till 10 pm to get home all start stop etc. Please note all lights are working...