Search results

QUESTION 1 - My rear silencer fell off yesterday, so which of these two would you recommend? ESR2391 | Centre and Rear Silencer Assembly - 300TDI (except Japan) £44.93 (inc. VAT) DA4223 | Stainless Steel Centre and Rear Silencer Assembly - 300TDI Non Cat (except Japan) - £248.40 (inc. VAT)...

My Disco 1 has a Safari snorkel fitted. I have finally got a standard airbox, but I just need everything to connect the safari snorkel to the airbox... Anyone know if this can all be bought cheaply, or perhaps custom-manufactured? I've been pondering and can't easily come up with anything -...

So... the front passenger door lock isn't quite working as it should. When the car gets locked, the door locks perfectly. When the car is unlocked, the lock does not come all the way up. It does move up slightly, but doesn't unlock fully. I then have to lean over and pull the lock all...

Hello! Long time no see... been a bit busy with stuff! ...and no, I don't plan to start one hell of a conversation again! Anyway... my Disco 1 (1997) has cruise control which no longer works. The rubber hose is worn out, cracked and useless. Someone suggested reinforced fuel pipe as a...

Having finished my hand-made boot storage box for my Disco, I have published the plans, diagram, layout etc... for the world to see! Feel free to share your opinions, build you own box based on the plans or whatever! I hope it's useful! Land Rover Discovery Boot Storage Box Plans &...

My 1997 300Tdi Disco has a two-button alarm/imobiliser/central locking fob. It does not work from any distance away from the vehicle and must be held up close to the vehicle for it to work. Even then it occasionally needs 3 or 4 presses for it to do anything. With the driver's door open, for...

After my Disco 1 being parked up for a week, the cruise control now doesn't work too well. It does work, but can't seem to get the accelerator pedal further than half way down. Also, when I set it to a certain speed it kinda looses speed at first and then struggles to regain it. If it's...

I just had all four wheels bearings (8 bearings in total, of course) replaced with brand new Timken bearings by the local indy Land Rover garage. After picking up the vehicle, I drove 8 miles home at around 60mph. When I got home, I held my hand against the cover that goes on the end of...

Is this exactly what I'm after or is it just right in concept, but has unusable fittings? Faithfull SPRAY5 5L Pressure Sprayer: Amazon.co.uk: DIY & Tools I know I don't need any fittings to fill the diffs up, but from those with experience, does this look absolutely perfect and flawless...

I measured the brake discs and here are the results... Front-Right: 10.8mm Front-Left: 11.2mm Rear-Right: 11.4mm Rear-Left: 11.5mm I understand that these are all too thin (on my 1997 Disco 1 ES with ABS). I'm going to get a garage to do this work because since tackling the wheel...

I'm having some problems... I hope someone can help... Here are some bullet points (very hard to summarise these symptoms I'm afraid)... It's possible that the ATF and auto gearbox filter has never been changed. It has a regular service history up to 96,000 miles (but with no details)...

To hell with my "ongoing problems" thread for this one - this is just a simple question! On a rotary coupler there is a yellow "conduit" carrying two airbag wires (red and yellow). There is a red plug on each end. If I put the multimeter on "Pin A" at one end, I get a circuit on both pins at...

Rotary coupler for steering wheel, '97 Disco 1 w/airbag & cruise control, please! Location: Cambs, UK

I am selling on eBay the following: 5x LAND ROVER 16 INCH "FREESTYLE" ALLOYS WITH 4x 245/75R16 MUD TERRAIN TYRES | eBay 5x Land Rover "Freestyle" alloy wheels (16 inch) with 4x Hankook Dynamic MT RT01 Mud Terrain tyres (245/75R16) with 16x Alloy wheel nuts & 4 locking wheel nuts with key...

I've found a BOAT near my workplace... visit Ordnance Survey Leisure getamap, sign in as "Guest", at the top-left click "Leisure" and search for "TL464636". I thought this might be worth a try at lunchtime, so I stuck it into Google Maps... here is the southern entrance: Google Maps (LOOK TO...

I have a tube of NO NONSENSE General Purpose Silicone Sealant, clear. I'm told it'll be fine to go between the rocker box cover gasket and cylinder head, but the tube actually says "Do not use on surfaces that bleed oils or plasticisers". Also, is it heat-proof? I suspect I'm being...

Today I had my wheels aligned. I was bored of the car wanting to pull slightly to the left all the time and having to hold the wheel slightly to the right to keep it in a straight line. It wasn't extreme, but becoming annoying and wearing my tyres down. So, here are the BEFORE figures...

Just learned (and tested out) the fact that you can use up to three Tesco fuel vouchers in the same transaction, thereby giving 15p off per litre! It does work. My diesel just cost 122.9p per litre, which was a bit better than usual :D

So there's the question...! My toolbox is in the boot. It's rather heavy and held against the rear of the back seat by the centre seat belt. If I had an accident, though, I suspect it'd jump out of the seat belt that wraps around its base and potentially head into the passenger compartment...

So... i've been searching and there's a wealth of information out there... only trouble is, I'm unable to put the right bits of it together into some useful information specifically for my vehicle, so here goes... I have a Disco 1. It's had a 2" lift and has standard length rock sliders. I have...