Search results

I have a power steering leak. It's coming from the metal pipe thats runs under/beneath the radiator and appears to connect the pump to the box. It's dripping so I guess the line isn't pressurised. Would it be ok to chop the split section out and put some rubber hose on for a temp fix? I've...

Right, my 300tdi-Auto-none EDC is fobless so this is a key based problem. Without the actuator the door unlocks and locks fine, with the actuator in place it'll lock but won't unlock. I've replaced several of the hoop retaining clips and tried the actuator in various potitions. The lock...

I'm after a N/S panel from a 5 seater and an O/S panel from a 7 seater. the colouring is a sort of beigey brown colour...

Now i'm confused. I have an M reg Auto 300TDi. Having had a look around on t'interweb I think i've worked out it's a non-EDC version. No wires, no MAF sensor and a throttle cable. Trouble is the immobiliser works a little too well. So well there is a wire running from the ignition barrel to...

I changed the front axle on my disco, its a 200 on a 300, but it fits. There is a rumbling noise, a land rover trained bod at the garage i took it to said "it's definately coming from the drivers side near the diff, check the fluid in the diff" Now there is no play in the wheel, I checked...

For sale ARCHOS - ARNOVA 4GB TABLET (ANDROID) Full gumpf can be found here Only a couple of months old, been out the box 3 or 4 times. All cables included, recent updates applied also. Cost £160, accept £110 (posted) Raising money for welding work.

Just pondering... How does an MOT tester test a Disco Handbrake? When i bought my disco it had already been tested and failed. One of the failures was "Handbrake efficiency below standard: 14%" just wondering how they test is, I've pulled the HB on and revved the car in drive (for i have an...

what's the proper name for those stupid little clips that hold the internal door mechanism rodding in place and can you still get them new? ta Dave

I could've sworn i'd posted this already but i'm guessing i either hit the wrong button, its been removed or deleted. If its one of the latter then a PM wouldn't be too much to ask with an explanation. However i'll go with the first one for now. I've been given a 200TDi timing kit, belt...

Righty-ho chaps. Now as i'm sure you're aware, most of us have friends who believe they know everything about landys, i have a couple and they are given me cross information. The problem is thus, i have on my MOT Failure sheet this.... 005 Nearside front Axle swivel joint has excessive play...

I don't suppose anyone knows what security system would be fitted to a 93 Disco. I have a black and grey single button fob with a 5mm plug in jack plug for an immobiliser. The system appears to be Foxguard. My insurance company won't insure me against theft until i tell them what it is.

It gets worse, almost thinking of going back to vauxhall! Having had the clutch fail we replaced the clutch, having problems getting into first and reverse we also found the slave cylinder was fubar'd. I have a replacement cylinder but now have lost reverse. My truck is the 2.0MPi version...

I've had to put this here because I don't know where this bit is from. I'm doing the clutch on my Disco MPi and found this underneath the car. Anyone got any idea where it is from? :scratching_chin:

I'm after a clutch for my MPi Disco1 after i burnt it out :D Anyone recommend a supplier? Also any other gen like what else i should replace (except the engine!) while I'm at it. Ta

ello shipmates. I thought i'd better sign up here too and various other places. Name is Dave, live in Grimsby, currently own a Frontera SWB and a Discovery MPi (yes there are a few kicking about). Picked it up for £500, T&T until september. Surprisingly rust free apart from rear passenger...