Search results

Thx for ur reply, bits ordered, should be all back on the road later today weather permitting, hopefully now with little or no oily mess on the drive. I knew it was very leaky when I brought it, told the garage it looked like the head gasket blown, I managed to knock him down by £500. Tuns out...

Thx chaps, Luckily I managed to borrow an Allen key from a local garage who just happens to be a mate. Drain plug now resealed manifold and turbo all pipes now back on. Do you need to replace the two copper O rings to the turbo oil feed pipe? and also while doing the camshaft seal on the front...

A fine day for some leak fixing, I have stripped down the turbo side of the engine today spent all day taking bits off here and there. turbo off, manifold off, A/C compressor loosened, egr cooler off etc.. etc....so far I have replaced the camshaft seal and cleaned up all around, replaced the...

Update, Thanks to a good mechanic friend, a mirror on an aerial thingy (very useful), a torch and the use of a pit, here is what we found. The oil that is down the center of the block behind the turbo/manifold, is leaking from the oil filter housing gasket. The camshaft oil seal is also leaking...

Thx for all your replies. It is 2002 td5 es, it is fully loaded and thankfully everything works perfectly..I only had it a few weeks and knew about the leaks and managed to knock £500 off the asking price thinking it could be head gasket, but now you have thrown in some ideas, I am going to be...

Many thx, can't get a better response than that, brilliant reply. Don't even have to scratch my head to see where it goes, thx again.:D

Hi all, Before I had this TD5 ES (108,000miles). I had a 300tdi, which I maintained myself, sometimes with a little help from you guys here. I have had my TD5 for about five weeks and really enjoy it so far so good, It has some luxury and compared to the 300tdi rides like a roller..lol. It...

Thx for your replies as I has been having a problem with the rear door strap jumping off the lug when i opened the door, it now seems obvious that it would be something to do with the arse end...many thanks malc, when the rain stops I will go and investigate.. Tyhx again all.

Hi all, I pulled back on the drive yesterday to find a rubber part on the drive, I am not sure if it off my 2002 Disco 2 or weather is has just been flicked off the road... Has anybody seen this item before and is it of my car, if so where?. Please take a look a the pictures supplied, many thx.

I haven't got washer or circlip, after a little gentle persuasion i have managed to bend the strap down enough to stop it jumping off.. sorted.

Hi all, The rear door check strap keeps jumping off the lug.. I just cant see how it is supposed to stay on. Do I have a nut missing or something similar. All I have is the looped metal strap and the lug it sits on.. Any Ideas, I would be very grateful..Cheers in advance.

Hi, I seem to have been a bit of a TD5 newbie as I did not realise that the front climate control has to be on before the rear A/C is activated.....lol. Well now I know how to strip down the nearside rear trim and put all back together again..Lesson learned. I am going to start a new post as I...

Many thx for the quick and informative response, i will have a look at the fuse first.. thx for the pictures...it helps a lot.cheers

Hi all, I have recently had a 2002 Disco 2 ES which was a replacement for my much loved previous 300Tdi......The car has been well looked after and maintained regardless of cost, plenty of bills to prove it has been cared for. Everything on the car works perfectly except for the rear A/C unit...

Hi Oliver, I just followed robint advise, found a few washers that made up the gap between the shoulder and the thread. Not sure why it fell short but the fix was cheap and easy to do. Just come back from mainland Europe after doing about 1800 miles in two weeks. No problems what so ever...

Took the nuts off thx robint, the thread only went up so far then stopped on a shoulder that the washer tightened on too, hence the rubber bushes were not doing their job. Not sure why, I just added some more washers and all is now good, thx for your replies..

Great, that sounds like a quick and cheap solution:).... getting dark now. I don't have the luxury of a garage, so I will give it a go tomorrow and let you know the outcome. thx...........and if you are looking at the garage doors on my profile picture..... if I owned a smart car I could use the...

I was sure I noted mentally the correct order, but then two months on i was doubting myself. Just had a look again underneath the old shed. The top most washer above the upper bush is loose on both sides. The shock is wobbly in the mounting but both nuts are tight.. Now what...? I have four days...

Thx for the quick reply james. Hhhmmm well I am sure it has cups both upper and lower sides.... Here is how I fitted the shocks. does it sound right? washer at the top of the spindle/shaft then bush next to mounting cup. Shaft through both cups then rubber bush up to the underneath cup and then...

HI all, I have a standard disco 300tdi. About 2 months ago I changed the rear shocks for a set boge shocks. The shocks went on well and I thought all was well. I have just had the car MOT'ed and I was told the rear shocks bottom bushes are a concern and need to be checked.. I have looked at...