Search results

;) Hello all Got a problem with V8 ? ask eightinavee he knows all! see V8 Disco O2 sensors, below. Thanks again Eightinavee ps I am not so worried about MPG, how can I get some more horses from my 3.9? Best wishes Robert58

Hello All Thank you for your replys, I changed all the UJ joints and rubber bush, vibration has gone! there is a small noise sometimes when I take my foot of the gas, but I think I can live with that. When I look at the front axle though, it looks as if the castor angle has changed, (axle leans...

Hello Eightinavee Success at last!!! I sent he sensors back to Craddock but they wanted 100 pounds each for the new ones, so I bought them on line (oxygensensors.com) in the states for 59 pounds each (shorter delivery time) and the car now fly's, also no more stalling, and the engine is so...

Hello Eightinavee I ordered 2 new 02 sensors almost a month ago, they have just arrived, problem is they have 4 wires, white, red, black and yellow! Plus a different conector, the sensors look the same. They are Britpart corresponding to ERR1834, I ordered them by post from the UK because the...

Hello All Just changed the springs and shocks, 2"lift, plus De Carbon gas shochs, the ride is better than a new one, BUT there is a little vibration that was not there before, any ideas?

Hello Eightinavee Sorry I took so long to get back to you. Finaly got round to testing the O2 sensors. With the engine cold I Have 13.8 volts on the red wire, nothing on the other 2. Problem is with the engine hot and running at 2000RPM I still get the same reading. is this O2 sensor failure on...

Many Thanks I will try tomorrow, E-mail you soon Thank you Robert

Hello Eightinavee I have tried to test the black wire coming from the o2 sensor but I am not sure if I am doing it right! I disconected the sensor at the connector (why do they make the wire so short) and tested the black wire from the sensor, with the engine running and at full temp. No voltage...

Thank you for your e-mail. The down pipes are together again and I can not find any leaks any where, I will test the black wire from the o2 sensor tomorrow. I have not put in any coolant since before last winter, so I know it is not using any water. Thanks for your help Robert

Can anyone out there recomend shocks and springs for my V8 Disco 1. Most of the time it is driven empty but most of the time it is driven off road, something with a 2" lift would be nice. Robert Taylor

:mad: I have a 1996 V8 with cats. Recently I have been loosing power, using to much fuel(even by V8 standards) and am stalling all the time. 2 days ago 1 of the down pipes broke in 2, I took it apart and : The inside of 1 downpipe and the same o2 sensor was black, the other looked as if it had...

Does anyone know how to test the O2 sensors on a 3.9 V8? Will my car run without O2 sensors? Running cold my car is fine when it warms up it missfires, if I stop it will stall ( auto box ) Changed the plugs, leads, rotor, coil, dis cap, Every week I have to take out the plugs and clean them...

Thank you for your reply, yes I have wires coming from the down pipes, but no I can not find a garage that has any idea what they are looking at! What is the number on the NGK plugs I shoud use? I will try and get them mail order from the UK. Best regards Robert58

Hello Eightinavee Thank you for your interest Checked everthing you said, changed the rotor back to the original, some difference, the tick over is much slower, and the car runs better,once moving. The HT leads I put on are not original and are silicon, only 20000 km, do you think I should...

Hello SLOB Yes I have cleaned the air mass meter, changed the leads ( 20000 km ago ) distributer cap, rotor arm,air filter, and plugs. the plugs I have in now have done 2000 km and are clogged with black carbon, the exaust is also very black and I am using to much petrol! thankyou for your...

What is a stepper motor, where do I find it and how can I test it?

Help, when running cold perfect! as soon as it warms up, missfires! if I stop in traffic it will stall, worse in reverse gear, once over 3000rpm runs good. Other problem is I am in Scily, I have been to the Land rover main dealer 3 times, and they now tell me they have never seen a V8 and their...