Search results

My DHSE sailed through with a PSI fitted just 3 weeks ago.

Old Faithfull. Disconnect battery for a while then connect up again. May possibly reset everything.

Mines broke! Ripped centre out of clutch last weekend. Now sat at top of drive, frozen. Blowed if I'm touching it over Christmas. Too much like hard work!

All the symptons point to a knackered propshaft uj but, obviously, if it squeeks whilst motionless then thats my theory blown to bits! Don't forget to let us all know when you do find it.

Check out the following. It's all covered! busters-photo-tour-landrover-repairs

Got half worn Saharas on my standard 90. Can still win trials. Mutts nuts!

Tire Sizing Guide For 16” British Tire Sizes

I needed some new tyres for my 90 so I was looking at the special tracks (235/85). I then noticed Insa Turbo Saharas in 750/16 size. I like 'em tall and skinny for off roading. I bought the Saharas and went to an RTV trial last weekend. (Road Taxed Vehicle.) 19 competitors with at least 3 of...

Our next events at Aston Cantlow are as follows:- Sunday 6th January 2008: RTV Trial and CCV Trial. To be confirmed. Sunday 20th January 2008: Fun/Playday: To be confirmed. Keep an eye on our revamped web site for more up to date information. Front Page - Click Above

Chequer Plating

2 things. 1: Running without a thermostat can cause turbulence which causes bad circulation. 2: Remove the radiator and reverse flush it while it's upside down. Watch the muck come out and make sure it flows freely. I know it's a pain to get the rad out with the oil pipes and all that but, at...

I bet you've partially squashed one of the rear brake pipes somewhere in the system. That would be enough to not fully release the fluid pressure to the rear brakes.

Just one per Country isn't bad going!

New diaphragms required.

Probably the fannymould gasket.

Aston Cantlow. This Play Day at Aston Cantlow on Sunday 18 June 2006 is open to both Members and Non Members Price is £20 per driver, £15 per driver for MROC (Midland Rover Owners Club) members. Start at 10:00 finish around 15:00h. Why not come and try out your 4x4? Directions. From M40...

Just for once, the Haynes manual describes it quite well. It even tells you how to make the required tools. (timing tools and crank locking tool.) Allow yourself plenty of time and check the water pump gasket for seepage while your in that area. Tony

Registration Letters http://www.needforspeed.co.uk/pages/Registrations.htm Swivel kits: Repair kits for front hub to axle mounting. Poly bushes: Replace standard, rubber suspension bushes. Give longer life and harder/softer ride as required. After market seats: Usually better material and...

You will need to chock the wheels, leave the hanbrake off and out of gear to feel play in the ujs. Oh, and while you're under there, check the big ball joint on top of the bellhousing on the back axle by using a crow bar. Tony

Quote HANDBRAKE CABLE Service repair no - 70.35.25 Remove 1. Park vehicle on level ground, chock road wheels and release handbrake. Alternatively, raise vehicle on ramp. 2. Remove 3 trim studs and lift up handbrake gaiter. 3. Remove split pin, clevis pin, washer and disconnect cable...