Search results

I am slowly working through changing all the oils and greasing all the nipples. I am at the back last job is to replace the rear diff oil. I cant see the refill plug, what am I missing? Its looks like a standard rover diff and according to Haynes it should be on the drivers side fron of the...

Hi I have a really good series 3 with a 300tdi fitted. the front standard leaf springs are corroded together so make the ride bone jarringly bouncy. I have already fitted new standard leaf springs to the back which seem to have flattened so the rear is lower than the front. I am considering...

Just thought I'd give something back to members. I used to work as a windscreen and sunroof fitter many years ago so when I brought a Freelander that was constantly misted up/wet inside this is what I did: Water leaves a white trace where it is getting in to the car. You can put UV die into...

Just thought I'd give something back to members. I used to work as a windscreen and sunroof fitter many years ago so when I brought a Freelander that was constantly misted up/wet inside this is what I did: Water leaves a white trace where it is getting in to the car. You can put UV die into...

I suspect I'll get an answer to this quite quickly. My 300TDI conversion uses an injector pump with what looks like a motor housing next to the diaphram on the top of it. There is a plug with 3 wires, brown, green, black. The block is stamped 18L which means its an EDC engine yet the pump has a...

Hi all. I have a 300TDI fitted to a series 3. Only had it a few weeks and have been concentrating on getting it through an MOT (Passed). When cold if I accelerate above all but a crawl it knocks. This goes when its warm but re appears under heavy acceleration. So when driving it I can't benefit...

1.8 02reg with aircon. need cooling control unit. This one has 4 plugs coming out of it, one for each fan, one for power, one for sender ecu. locates on fan cowelling. Anyone got one for sale?

2002 Freelander 1.8 GS A/C. Took it for MOT, while revving it up for emissons the bloody thing started to boil. Luckily HG does not seem affected. Fans not kicking in. So I have read up on it via Haynes manual. Got new temp sensor coming as I hope this is the issue having read on this site the...