Search results

thanks for the responses. whats a broken loom? sorry not up to date with these things. ive just bought an injector leak off test kit ill test the injectors soon as it arrives. is it possible to start the engine with the engine manifold off without causing damage? its a pain to put it all back...

they were used bought from ebay so i could of been sold fautly ones as for the reason they were changed. i was getting white smoke on start up and the engine started to run bad at times its been getting worse over the months from what i read up people say its the injectors. 2 of the injectors...

ok so i tried removing each wire from the 6 injectors and with all 6 the knocking noise is still happening does anyone know what this could be?

hey just changed some injectors on my 2003 TD6 now there is a loud tapping noise coming from the engine. Ive been trying to search the issue and some people have came back and said its a faulty injector. can anyone confirm this? also will pulling the wiring out the top of each injector stop it...

they are little rods you replace on the height sensors to make the car think it is lower so the ecu will increase the height but they only do 2"

hello got a 2003 L322 TD6 want to put some off road wheels on it ive installed the johnsons 2" lift kit and would like to increase it abit more is there other software units that can be used to increase the height apart from the overpriced IID tool? thanks

It seems if i turn the ignition on and let it warm up a bit then it does not smoke. I've had the car for 5 years and always started it the same its never smoked only recently so i am guessing it's an upcoming issue but for now its ok thanks for the replies

L322 TD6 started having a strong smelling white smoke coming from exhaust on start up it disappears right away and only does it on a cold start. i have changed the crankcase breather filter but its still happening anyone know what it could be? thanks

Anyone know the reason why the alarm light under the rear view mirror is blinking really fast? i thought it might of been a door or the boot not closed but I've checked and reset the alarm but the light is blinking really quick. the alarm itself does not go off its just the little red light...

thank you

I know its not the best option but is it safe to tow a L322 TD6 for 3 miles and what would be the best way todo this without causing any damage if possible?

Going to get it recovered home today will change the fuel filter and 2 of the fuel pumps. ever since it broke down the fuel pump is not as loud and sounds as if its struggling going to replace it again just to make sure. are the green relays in the back all the same could i use any of them to...

Sounds like the o-ring on the pump has worn, you can buy them very cheap on eBay and replace them yourself i had a similar problem with mine fixed the problem myself by doing this. i think there is a video on YouTube on how to-do it. its quite simple

Got a 2003 L322 TD6 Driving today and got "Fuel Injection System Error" on the dash and the car cut out and now won't start Left it for a few hours and went back same thing car turns over fine but fails to start constant message on the dash. put a code reader into it and came back with the...

Fault ended up being front height sensor was facing outwards instead of inwards pulled it off and placed it in the correct position drove it around for a bit and the suspension started working again

Taking it back on Monday hopefully they will fix it. could be this hopefully it will clear when i drive it over the weekend. could be a faulty sensor i dont know hopefully ill find out on Monday thanks for the replies

i don't know a local garage did it for me Ive looked, and they seem to be connected i checked under the car before and noticed one of the height sensors was facing inwards so i pulled it off and placed it outwards thinking that would fix the problem but it hasn't. Does anyone know which way...

How would i go about doing that.. i take it am going to have to take it to a specialist?

got a range rover l322 just had the 4 front suspension arms replaced now its coming up with air suspension inactive i have tried doing the steering wheel reset but its not working. i plugged it into a fault reader and its coming back with air suspension CAN error any ideas? thanks

Turns out it was the secondary fuel pump, well its seem to be anyway i have replaced it and the car now starts and drives fine But now when i turn the car on the new pump is making a really loud noise and there is a hissing sound coming from the front of the engine under where the EGR valve is...