Search results

Hi, I have a problem with my oil warning light, the problem is it never comes on even when engine isnt running. ive changed bulb, checked contacts on the back of the clock which comes back around 12v so bulb is getting power, changed oil switch checked cable to switch all seems fine. can i...

Hi, I was on way home from work when I was hearing knocks under the car when I got back I noticed front drivers side antiroll bar droplink had snapped. Now the airbag on that quarter wont inflate. My question is it because the droplink has broken that the airsuspension isnt inflating that...

Hi, another problem with my rangie. Recently had a new clutch kit fitted all was well, but yesterday clutch pedal went to floor and was leaking fluid from slave, fitted new slave cylinder but just have no pressure in pedal after bleeding it, pedal just stays on the floor. I had read posts...

Hi, Every morning I start up and the clutch pedal goes very slack and and stays on the floor dosnt come back up until I lift it by hand, If I leave the vehicle like about 5 mins and comeback the pedal is perfect and will be perfect all day until next morning. I have no leaks in the system or...

Ive recently thried downloading the rave cds from different sites but with the same problem, I use the acrobat reader that was on the disc but cant view any pages without it asking for a password. Is there and rave cd download out there without password protection or what way do you guys view...

Another problem I have now :( when I press my brake It works then it pushes back up then back down once it has gone back down it becomes harder to stop dosnt go to the floor just becomes abit softer to press, abs pump comes on, even when engine is off and just ignition on I press brake its hard...

Hi, I have 2 problems :( First I have a 1995 P38 Diesel seems to lack in power drives ok ticks over perfect revs perfect but when your driving and put your foot to the floor on motorway its just nothing there I can get over 60mph gradually. How do you know if your in safe mode(limp home...

Hi, I have a P reg range rover p38 diesel manual gearbox, was running perfect then one day I cant get reverse or 2nd gear. Ive stripped the whole centre console, the sound proofing, removed gaitors, I can see inside and the pin well bolt holding the gear lever in place looks worn I want to...

Hi, Just need to know to remove the oil pump on a 4.203 is it removed from the sump area or do I need to break down engine from top as the manual is useless to follow. Second question does the engine fit straight onto landrover series 3 engine mountings or does it need mountings modified...

Hi, Just need to know to remove the oil pump on a 4.203 is it removed from the sump area or do I need to break down engine from top as the manual is useless. Second question does the engine fit straight onto landrover series 3 engine mountings or does it need mountings adjusted? thanks

I have a 3.5 perkins engine in my series 3 has broke a few rear halfshafts but was told if i run in 4wd will be easier on the shafts as torque is split to front and rear so thats what ive been doing and seems to have done the trick ( touch wood). question is, is it ok to run in high range 4wd...

Hi, I have a 1983 series 3 the problem I have is that the passenger front wheel sits slightly on an angle (i think its positive camber). If i drive on full lock the steering wheel kinda jerks left and right and you can see the wheel skiding trying to straighten up where as the other wheel is...

Ok I need more advice on my brakes :scratching_chin: I have a series 3 SWB with a perkins Diesel fitted the problem I have is my servo assisted brakes dosent have a vacuum pump from engine anymore so I need to fit an alternative pump. I'm thinking of putting an alternator from a transit van or...

Hi, I have a series 3 with a perkins 4203 engine just wondering can anyone help me out on how do get my servo brakes working with that engine? Also anyone know of any sites or anything that sells parts for the 4203. Thanks

Hi, I need to get a new passenger side front brake caliper for my discovery 1 300tdi 1994, 3 door, non vented discs, problem I'm having is every time I order one from shop or internet the one that is sent has twin brake pipes going into the caliper and mine only has 1. Anyone know the part...