Search results

Thanks for the replies, I will try earthing the switch. Also my Range rover p38 has 95.000 on my clock the new one has 88.000 will is just goto the highest which is my original using ecu memory and store my 95k to the new clock ? Thanks

Hi, I have a problem with my oil warning light, the problem is it never comes on even when engine isnt running. ive changed bulb, checked contacts on the back of the clock which comes back around 12v so bulb is getting power, changed oil switch checked cable to switch all seems fine. can i...

Thanks for reply, So will that be reapirable or new sensor ?

Hi, I was on way home from work when I was hearing knocks under the car when I got back I noticed front drivers side antiroll bar droplink had snapped. Now the airbag on that quarter wont inflate. My question is it because the droplink has broken that the airsuspension isnt inflating that...

It was done by a local garage cost £300 pounds to fit clutch thats with me supplying parts, took back they have renewed pins and a new slave cylinder for another £200:( , problem I have now is I only have clutch feel in pedal from about 2inch or so from floor then the rest of of pedal feels like...

Hi, another problem with my rangie. Recently had a new clutch kit fitted all was well, but yesterday clutch pedal went to floor and was leaking fluid from slave, fitted new slave cylinder but just have no pressure in pedal after bleeding it, pedal just stays on the floor. I had read posts...

Hi, Every morning I start up and the clutch pedal goes very slack and and stays on the floor dosnt come back up until I lift it by hand, If I leave the vehicle like about 5 mins and comeback the pedal is perfect and will be perfect all day until next morning. I have no leaks in the system or...

Hi, Finally got it off :D went to machine mart and bought Clarke CHT243 Oil Filter Chain Wrench - Machine Mart , cheap and worked a treat new one on and all working perfect thanks again for all advice.

Bought my new accumulator and arrived today :) , but can I hell get the old one off tried all different types of oil filter straps, there is a 22mm nut on the bottom of 'the bomb' but cant get spanner on. :Cry: Is that the best way to get them off is the filter straps?

Bought new filter and housing fitted new pipes and a new pipe fron the filter sensor to manifold, engine running at full power now thanks alot for the advice guys.

Ive read through the old rave thread and downloaded those files but all ask for password and on the thread no-one has put up a password.

Ive recently thried downloading the rave cds from different sites but with the same problem, I use the acrobat reader that was on the disc but cant view any pages without it asking for a password. Is there and rave cd download out there without password protection or what way do you guys view...

I know this is an old post but just downloaded 3 disc rave but when I try to view files from the reader4 just says file is passworded, cant locate any file or keygen to get password.

Anyone know where I can buy the plastic fuel filter housing and pipes from, tried a scrap yards near which have no rangies in and ebay has none. Thanks

If the accumulator has failed will there be leakage aound where it screws in as mine has no leaks or do they just lose pressure when they fail?

Another problem I have now :( when I press my brake It works then it pushes back up then back down once it has gone back down it becomes harder to stop dosnt go to the floor just becomes abit softer to press, abs pump comes on, even when engine is off and just ignition on I press brake its hard...

Fuel filter bypass, could this be giving me lack of power the smallest hill I crawl up dropping gears right down :S

Thanks for replies, ill take a photo tomorrow.

Hi, I have 2 problems :( First I have a 1995 P38 Diesel seems to lack in power drives ok ticks over perfect revs perfect but when your driving and put your foot to the floor on motorway its just nothing there I can get over 60mph gradually. How do you know if your in safe mode(limp home...

Hi, I have a P reg range rover p38 diesel manual gearbox, was running perfect then one day I cant get reverse or 2nd gear. Ive stripped the whole centre console, the sound proofing, removed gaitors, I can see inside and the pin well bolt holding the gear lever in place looks worn I want to...