Search results

Thanks so far guys. Today in the light I had another look, all the solonoids were clicking on change over and I could hear gas on the change over and for a few seconds after it died. So I looked at the stepper? motor on the gas pipe to the inlet. I took this off and operated it by hand to the...

Oh and the B part i think there is another one of these on the bulkhead at the back of the engine. Dean

To be honest i don't know, i have only had a brief look in the daylight, it's been dark since and not been able to see anything. The ECU/Brain was a little wet but only sprayed with water not submerged and the connector is fairly well waterproofed. What are these two items called, they are...

Its a BRC single point. Dean

Ok guys hope someone might have a idea on what to look at. My disco normally runs fine on gas and petrol but after it's little swim on Sunday's laning trip it won't run on gas anymore. The engine was well and truly drowned during it's swim but it still ran and did not stop, left it running...

I modified a older can type air filter so that i could do something similar to what you require. The plastic original box was no good as it meant the second battery would not fit so i used a older metal one from a older V8. I know the intake system is a little different on the diesel but i am...

Ok anyone replaced them? how easy? Losing all confidence with the disco at the moment with regards the engine temperatures and cooling. After last weekends coolant pipe blowing and then the water pump letting out more water than it was pumping on monday it has been fine back and forth to...

As title really. Range Rover V8 auto (93) Had a few strange problem on way home yesterday whilst on the motorway. I have a strange sort or rotating/running/rumbling noise when i lift of the throttle a bit, does not seem to be there if i lift completely and it is not there whilst accelerating. i...

Just solved the problem. Was not the earths as they were sound. Turns out it was the bulb itself. Was a new bulb about 6 weeks ago as i thought that was what was causing the problem as the dipped beam stopped working. Seems somehow i managed to buy a faulty bulb. >:( Dean

Hi guys, Hoping you can point me in the right direction. I have the rave manual but it covers the electrics on the 95 soft dash version. Where can i get one that covers my 93' classic. I have a funky problem with my headlights. If i put them on dipped beam on the LH one works. All the...

So the actual wheels will bolt on ok?. Dean

Hi Guys, Been offered some MT (235/85/16) tyres that are fitted to a set of disco alloys, will these bolt straight on my Classic Range Rover?. I am planning a 2" lift. Cheers Dean

Thanks for that. It is a 93 classic and i think it has a plastic tank. Any ideas where to get the parts?. Dean

Hi Guys, Getting to the bottom of most of the Rangies problems just one left. I have a petrol smell at the rear, i want to replace the pipes from the tank to the filter. When i took the cover of the boot floor i noticed that all the pipe connectors were corroded and the same at the filter. I...

The other problem i have is a strong petrol smell when the car is parked. If it is parked for several days there is no smell, it seems to be only for a period of time after i have driven it. The smell is at the rear of the RR mainly on the drivers side. I have had a good check around and can not...

Hi Again Guys, Now i have solved the transfer viscous coupling i am back to trying to sort the intermittent running issues. I took the RR to work again yesterday morning, i had done about 3 - 4 miles when i got stuck in a little jam, the revs dropped to about 100 150 rpm but the car still...

OK Guys, Managed to get a known good transfer box from Anyparts international this morning. Spent the afternoon trying to get the old unit out of the RR. We got the front and rear props off and everything disconnected. We managed to get all the bolts except one out. The one on the top...

Thanks for the help so far. Seems the AT fluid was not that low and only took about 3/4 of a litre. Will do a complete change in the next month or so when i have resolved the other issues. I will have to change the VC or the transfer box, but in the mean time i was wondering if i would do...

I have never had a auto before let alone had to change the fluid, how do i go about changing the fluid?. Do i need anything apart from the fluid? Dean

Thanks Guys, I have today managed to change the Coil and amplifier disi cap and rotor arm. Have bought a fuel filter but not done that yet as the existing is very manky so i have soaked it all in WD40 to be done tomorrow. I have come to the conclusion that it is the Viscous coupling after...