Search results

Range Rover Classic Workshop Manual 1986 - 1989 Petrol & Diesel Condition is used but in very good condition - located in Suffolk and willing to post but would guess postage at around £10 .... £25 including postage ....

Ah, I can still raise the engine at the moment (mounts are just tack welded) but not too sure how much difference that would make owing to the angle - suppose I could also raise the transfer case mounts slightly -

I thought the 300tdi would be okay too - some photos on google show a skinny prop but do not say where from... Could do a bit of sump bashing but the prop actually touches the corner of where the engine mount strengthening joins the engine bellhousing area. An extra thin prop from a specialist...

Ashcroft adapter plate

Hello I have the engine r380 gearbox and the series transfer case all nicely lined up but have just realised that the front prop will touch the corner of the sump. I have spoken to a propshaft company who will make a thinner prop but it will still only miss the corner of the sump by about 15mm...

Yes, all correct although the crankshaft pulley bolt is off centre with the hole in the cross member.

Yes, that's what I've checked - spirit level on the chassis then on the rocker cover but was waiting for someone to say ah or but !! If this is correct then I'll go with the top of the front pulley level with the top of the front cross member.

Not welded in yet but Steve Parker brackets with the original 300tdi rubber mounts - R380 gearbox adapted to the series transfer case.

After fiddling around most of the day trying to level up a 300tdi in a swb series 3 would a good guide be about level with the crankshaft pulley/front cross member. One of the images was taken at an angle but barring the odd mm the top of the pulley is level with the front cross member. The...

Thank you for the Wolf link and thanks for the tip about buying trailer tyres (that's the sort of info I was after).. Looks like I'll be calling 4x4tyres next week -

Might be worth a telephone call to John Richards to see if they have a set otherwise I'll keep searching.

I am still working on re-building my series 3 1971 swb and was casually looking for a set of wheels and tyres. I came across this offer from John Richards https://www.johnrichardssurplus.co.uk/goodyear-g90-750-x-16-tyre-on-land-rover-defender-wolf-rim-collection-only.html Are their any forum...

It's got me flummoxed as well - hoping a forum member knows the answer -

I purchased the Ashcroft kit a couple of years ago and have finally got round to assembling it. Using the existing transfer case chassis mounts together with an R380 gearbox. Perhaps someone could help with how/where you mount a bracket for the transfer case lever. A length of angle iron came...

I have both left and right rear doors from a classic in good condition. If you send me an e-mail I'll send over photos.

Both front wings from a two door Rangerover plus a rusty tailgate.

Ah, just what I wanted to check - thanks very much

I know various GPS topics have been covered before but if I was to install something like the Pioneer AVIC-F500BT or a later version in the cubby hole box at the top of the dash - modifications needed are on google - then as my old Pioneer radio has given up the ghost am I correct in thinking I...

HD screen:D Because they are made in huge quantities and sell on low margins.Ah thanks First thing then - see if there is a way of neatly installing the screen in the dash - might buy a secondhand trim to experiment with - Cheers

Speaking of looking at the maps - is there a way of the music cutting out while the GPS gives you directions and then returning to music automatically - Just a thought - but why is a made in China 7 inch Android less money than a 7 inch pc monitor or is the screen quality vastly different -