Search results

I've put an M6 in at the moment, however there is a slight bit of play on the sensor so it occasionally throws the MIL light on. The hole on the sensor is wider than m6 so need something that is sleeved at the top.

Wonder if anyone can find this, I'm needing the Camshaft Sensor bolt for the 1.8 K Series. Had a look at Microcat and can't for the life of me find it! Anyone?

Doesnt sound too bad too me, If blitz dump valves are that good, i'll take 5! :D

Oh thats a shame, If Blitz did a dump valve for the 200 that would of swayed my decision to put that engine in an old rusty 2a I have kicking about. Now because of Blitz the poor old beast is destined for the scrappys becuase I will never have the power without that Tiiiiisshhhhhh :p

I think this is getting a bit off topic now What I want to know, is if Blitz actually list the 200tdi in they're catalog!

I would say run 2 Intercoolers, just to be on the safe side, and for more power go for a HKS BOV rather than a BLITZ job. I hear they electric supercharger thingys are meant to be really good as well, so if you can get a couple of them in line of the intake the old M51 should be making close to...

I'll have a bash at taking it off tomorrow however the chances of it coming off in one piece is pretty slim. New there only about £20, Is this it here? ANR2500 REAR BUMPER INNER SUPPORT ASSEMBLY | Range Rover P38 1995>: Body/Fittings: Brackets/Fittings | shop | www.lrseries.com | L. R. Series

PM Sent.

No problem, I've got a reservoir tank, however the rear upermost bolt has snapped so will either need to be drilled out or may possibly come out with mole grips, if thats any good?

Is it the rear bulb holder you are needing? Also is the plug you are needing on the compressor side or the body loom side?

Have a 1999 4.0 P38 im currently breaking, however I have loads of other bits kicking around, e.g 4.6 gearboxes and other 4.6 bits. Need anything just give me a shout.

Alloys in great condition, Tyres not so good, removed from a 1999 Range Rover im currently breaking. £200 collected, or could get them delivered on a pallet to mainland UK addresses for around £55. Tyres are as follows; 1x Goodyear Wrangler 255/60/18 with 4mm Tread 1x Nexen Rodian 255/60/18...

Power steering box from a 1999 P38. Good working order, no leaks, popular for converting series vehicles to PAS. £40 collected from Fife, Scotland, or couriered to mainland uk addreses for £50.

May as well change the filter while your under it anyway mate, let me know how you get on.

Its not immobilised mate, Check Engine Light is coming on and the codes in BECM and ECM are the same.

Hi Mate Jumping the inertia won't work, there is no circuit running from the pump to the switch, (White and BLue Wire). The only wire that is showing a circuit on the switch is the one which goes to the BECM, (White and Purple wire). The other which then goes up to the FB again is showing no...

Hi, It definately sounds like it needs a resync, can come over this afternoon if your free, my number is 07745893969, if you give me a call we can arrange times etc. Cheers Kraig

Can pop over the morn if you want, send me a pm with your address details, can't do tonight, missus is making the tea.

Might not have been the battery voltage could of been interferance, i've had 2 P38s do this at the same time and had to be resynced. £1 a mile is one way by the way £60, im sure Syncmates are around the £130 mark.;)

How much is a gallon of petrol? And at around 18mpg how much would it cost to go on a 120ml round trip?