Search results

That is kind of what I thought but I do like to know I can repair the at the same time, will have to see if i can get myself a bearing kit.

Almost sure its the bearing, when tightened the play does go for short time only to return a short while afterwards. More than happy getting my hands dirty just want to be sure I changing the right part.

I seem to be having a problem with the front nearside bearing on my 200tdi disco. I adjust it up taking any sign of any play away then once it is back on the floor the play is back and causing shaking when driving. What would cause the bearing to do this???

Water in the airbox?? wet air filter?

I know I have probably put this in the wrong place, so please move if needed, thanks!! Does anyone have a back box for a 200tdi disco, after getting caught for the 3rd time I cannot reuse my existing one it has split now I am in Solihull and am willing to travel a bit my job does take me...

Hi I am told there is a p&p at aston cantlow this weekend any idea who is running it?? I thought the site was closed

Probably cheaper to buy a decent socket set than pay someone to swap the axles. I did this job on my disco not that bad to do all.

As above really, anywhere to get muddy this weekend??

I had same problem on my 200TDi, got sick of washing and replacing headlamps, took a step backwards (or so some would say) and fitted sealed beams from a Range rover classic. Bright enough for me, and no more dismantling and cleaning.

Is there no chance you could use a hammer and a good chisel?? One of my rocker bolts was well and truly rounded when I came to do my timing belt, big hammer and chisel got it moving.

I was aware that sealed beams would be useless, but having fitted them they are producing more light than my standard headlamps, probably due to the lack of mud, but so far I am happy enough. Am going to get some side markers off Ebay should do the trick.

Yes me!!! when trying to get the bolt undone on crankshaft damper to do timing belt. Took me over 4 days on one bolt. Keep up with the blow torch, and hit it with hammer at same time ( mind you dont get burnt!!) Then knock socket on, should be tight fit and use big breaker bar.

Everytime I go and play the headlamps on the 200 ended up looking like muddy pools and becoming very dull, I have spent 2 much money replacing the headlights so decided that sealed beams would cure the problem once and for all.

Have looked on SVA site and there are regs for headlamps but no mention of side/position lights, this is the reason for asking on here, I sure someone must know. For the moment I just switch straight to my headlamps just to be safe.

Does anyone know what the rules are regarding sidelights. I have swapped my headlamps for sealed beams on my 200tdi, this obviously means I now have no side lights. I do have 8 leds built into my roof bar lights that come on when sidelights are switched on, are these enough or do I need to sort...

I need the 30mm bolt and large washer that holds the vibration damper on. As I ended up cutting mine up and thought I had a new one off Ebay but it has turned out to be different. Does anyone have one I can buy please???

Finally got the thing undone, just as I was about to call the scrap man to take the landy out my sight!!! I ended up cutting 3 grooves into the washer beating it with a big hammer and chisel then bouncing on my breaker bar with scaff bar slid over it. This after breaking 2 breaker bars...

the engine mount flexes and pushes the engine to one side.

OK, have tried using the engine, have tried my air gun (although not convinced this is working correctly) have tried heating it up and bouncing on it with big bar and still no joy. What if I cut the washer off would that help relieve the pressure on the bolt and then let it come undone?????

My timing belt has gone bang, which is not a huge worry but I cannot get the large bolt undone on the crank damper. Have had a locking tool on it with a 4 foot scaff bar on my long breaker bar and all I managed to do was bend my locking tool and shear a bolt that held it on. Anyone got any...