Search results

I'm having trouble with a garage who replaced all 4 injectors with what they claim are new. The engine revs once then goes into limp-mode with the new injectors. I suspect the garage may have got them from a scrapped vehicle. I'll add the identification numbers from one injector (they're all...

My 2005 FL1, Td4, has a stuck injector. No's 1,2 & 4 were easily removed and in an as-new condition. The engine failed on the No3 cylinder. A limp mode kicked in, and moving was nigh on impossible. I've treated the injectors fitment with lots of WD40, but all to no avail. It refuses to turn or...

I replaced the MAP sensor. I noticed the probe wasn't a tight fit so added an additional ring seal that was trapped tight as the sensors was bolted into position. At last. No smoke or nasty smells of exhaust.

Our 96 Td4 has been a stinking vehicle for a few years, getting worse through time. I changed the turbo, filters, used top-range fuel, added Injector cleaning additives, etc. And all to no avail. Geez! My wife wouldn't let me open any windows, including the split sunroof as it allowed the stink...

The aluminum holder for the rear central brake light needs replacing. It the part that holds the red plastic. Might anyone know its name & where I might get a new piece?

I have a 2005 FL1, Td4, 3-door, and wonder if anyone has fitted an alternative roof aerial instead if the original lengthy bee-sting? With details & hopefully a Link - if possible. Thanks.

Hi. My 2005 FL1 Td4, air-cooler from the Turbo needs cleaning-out and wonder if anyone has a simple method of doing so? There is one method of removing the bumper, etc, to remove it, but might there be an easier method? The reason? My turbo, which is about to replaced - tomorrow, has been...

Hi. My Clutch Slave Master has a large rubber-bulge on the cap's inside, which displaces a lot of the oil when fitted. What is the purpose of this large rubber-cap? What if I removed it? Leaving the cap on its own. It would allow a larger amount of fluid in the Master Slave unit. But might there...

I'm pretty sure the following clutch-kit is the one for my Lander. Might anyone know for certain, before I actually buy it? It matches my SUV, but just want to be certain. ------------------------------------------------------------------ LuK 623 3772 33 Clutch Kit for LAND ROVER Freelander I...

Hi everyone. Having recently queried a Quotation for a clutch kit replacement to my 2005, FL1, Td4, and received fantastic help & advice from LZ members, I have one more question to ask. To begin with, I have decided to replace the clutch myself, and am now getting my tool-kit together. There is...

Hi everyone. I asked a local garage, in Spain, for a quote to replace the clutch & slave on my 2005 Td4. I am pasting what was sent to me. Might anyone have a comment on the price(s) quoted? It does seem an awful lot. My Lander has only done 99k miles. Any thoughts, anyone? The price is in...

Might anyone give me some idea how much a clutch & slave replacement might cost? And how long it might take? Has anyone had this done recently? Thanks everyone. Oh, my FL1 is a 2005 M47 model.

Might anyone know how much oil the clutch reservoir takes to be full? Thanks.

Hi. The clutch failed on my TD4, discovering there was not enough oil in the small reservoir. Once topped-up it was fine. It didn't need bleeding. My question is? What is the capacity of this minuscule reservoir and why has it got such a large rubber insert on the lid? Surely this...

Hi all. I removed the HP Fuel Pump regulator, replacing the 2 seals ( a rubber & plastic). They worked but was left with a slight fuel leak, which I thought was from the regulator's gasket. It turned out to be the return fuel line from the injectors where it joins onto the metal pipe above the...

I have a problem with my 2005 Td4. The rear door glass seems loose, to the point where it catches the plastic framework as the door closes, before automatically rising to complete a seal. The glass is prevented from motioning upwards to complete its movement because it comes into contact with...

Hi. i'm new to this Forum, and ask for advice. My FL1 Td4's (2005) front brakes were giving a real graunching/crunching sound about 2 years ago, when braking. I replaced the pads, hoses and the calipers, along with the fluid. Everything looked okay, by the way. And all has been well, until now...

Hi everyone. I have a Hymer (1992 B534) Motorhome and my two front seats (driver & Passenger) need replacing. The mechanisms are okay, but the padding & material have been chewed to death by dogs. Their fitment is by 4 bolts on each seat, one in each corner. The front bolts are approx 31.5 cm...