Search results

Thank you, and same here

Ignition switch at fault shown through testing and the corresponding pin on the connector for the ignition switch damaged / loose

Ah okay as that’s the next thing to test and if it’s not that then there’s a problem in one of the looms

Would a faulty ignition aux feed from the key barrel cause the problems I’ve got?

The relay doesn’t have an activation feed to it, so I’m not sure what to do other than replace the box or move the relay outboard, and run the activation feed from another relay or a switch. Might just need to get someone to help find the problem to fix it.

I’ll check the relay and fuse again and see if it has a power feed and if not I’ll replace the fuse box and go from there

Would the aux relay drivers side stop power from coming from FL7 or not if it’s best I don’t try bouncing power to FL7?

Ah okay, is there a way to feed power to FL7 without replacing the fuse box?

FL7 is intact but can’t get a power reading from it not sure if I’ve checked it wrong or just no power to it, double checked if it was the fuse with another 30a one there and still nothing

Don’t have power to either of the radio fuses and there seems to be other systems not working like the wipers, I’ve been through every fuse and they are intact and had a meter across half of them and no power at all

Which relay is the aux relay?

It’s a 2003 facelift TD5 Series 2 Disco

Does anyone know where the ignition feed / switched live for the radio comes from as I have no radio the constant power feed is live, but nothing on the switched feed. Thanks Llewellyn

For now I’m just putting the momentary switch in to crank it, until I’ve found more information and learned to be able to fully fit push start button.

Which one runs the starter so I can wire it in with out running in to a hold load of trial and error

The five wires on the back of a 2003 TD5 Discovery 2 ignition key, what colours are they and where do they lead as I’m struggling to find a diagram that has the colours of the wires, placement of wires on the barrel, and which wire does what. This is so I can add a keyless start button Any...

The five wires on the back of a 2003 TD5 Discovery 2 ignition key, what colours are they and where do they lead as I’m struggling to find a diagram that has the colours of the wires, placement of wires on the barrel, and which wire does what. This is so I can add a keyless start button Any...

Is there a way to check whether a gearbox is an aftermarket one or an genuine/OEM?

The truck my boss ran happened to be cammed and it was a 10p TD5 thanks for your help though

I’ve got updated inter cooler and main rad and associated hoses and full electric fan, valves pistons and crank along with the cam are the next to do I’ve got a stage 2 or 3 tune lined up along with a larger turbo to fit and full stainless but certain bits like the cam I’m struggling to find to...