Search results

Just made up a new driveshaft to solve some drive line alignment issues

I have a 200tdi in it. Front driveshaft is okay. But the parabolic springs have lifted the rear up enough to cause alignment issues. The double cardan joint on later rovers has too large a diameter flange to fit on the rear output flange of the transfer case.

Hi Has anyone used a double cardan joint on a series 2a? Im trying to fix some drive line alignment issues. Not having any like finding a double cardan that will fit on the rear output flange of the transfercase Thank you

I got it done, thanks for all the help. It was a bit tight and the original vac hoses arent that strong. I wonder if any forum member used to own my disco? It was purchased in England Its a green 91 3 door. it had steel front and rear bumpers , big winch up front. Car alarm with a back up...

Perfect! Thank you

Yes, thats the part i dont understand. I can see the actuator on the left side of the heater box, but where is the solenoid?

Hi. What is the vacuum hose routing inside the cab? I guess it goes to the solenoid then the actuator? Where is the solenoid located? Thank you

Hi Im almost finished a alot of work on my 3 door disco Im a bit unsure of the vacuum lines routing for the heater assembly. Can someone point me in the right direction for info? Thank you

I only have one wiper arm Can anyone tell me the part numbers i need to order new wiper arms for this style of wiper motor?

This the style of wiper with two different arm attachment types??

Hi. I did a quick search but didnt see the info i need My 2A has the two fw2 lucas wiper system One wiper arm has a small screw to secure it to the wiper shaft One of wiper motors has a threaded collar on the shaft that would secure a wiper arm to it? Im not interested in the period "correct"...

still a work in progress. Fitting defender seats and a split tailgate . Installed a tach and EGT gauge. I had to run exhaust up and down as I couldnt get by the steering box(LHD)

I think its called a Kodiak heater. Might be a canadian option. Blows alot of heat. Car has salsbury axles and turner over drive gears in transfer box. Parabolic springs but i dont like them so far. rear sits 2" higher in rear and way too firm

Putting a 200tdi into my series Yup, been done many times but I found LHD vehicle added a challenge with the exhaust

perfect, thank you

HI. Im rebuilding my 2a wiper motors. the rubber insulator that the power spade connector os mounted on has crumbled. Does anyone sell parts for these units? Thank you