Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. K

    Should a diesel engine be scrapped for low compression

    Hi hope someone can give me some advice will a diesel engine start with low compression in one cylinder my mechanic says no and it needs engine replacement
  2. K

    Glow plugs burning out

    Hi purchased a freelander 2 automatic 2008 none starter checked it over found all 4 glowplug not working would not light at all so installed brand new Bosch Fast Heat Duraterm Glow Plugs after testing them rebuilt and tried to start no look then fault code came up glowplug fault stripping it...
  3. K

    To cut or not to cut that is the question

    Hi l have applied direct 12volts to the rear pump l can here it running but when l take the fuel line off the supply filter there's no diesel so it looks like something is wrong in there now to replace it l will have to take the exhaust off and the prop shaft so is it best to widen the hole...
  4. K

    Anyone know a mobile drill and retaper please

    Hi got a freelander 2 and someone has broken the hold down bolt to a injector and held it down with a small bolt against it l wanted to do a compression test but cannot get a good sealso it must not be sealing right when injector is in can anybody recommend a mobile drill and retaper if there is...
  5. K

    Anyone know of a mobile drill and retaper

    Hi got a freelander 2 and someone has broken the hold down bolt to a injector and held it down with a small bolt against it l wanted to do a compression test but cannot get a good seal so it must not be sealing right when injector is in can anybody recommend a mobile drill and retaper if there...
  6. K

    Cranking no start

    Hi can anybody help me my freelander 2 2008 cranking but no start fault codes p2564-37 p0340-00 p0380-00 p0642-00 they are all circuit A and state permanent do you think it needs a ECM thanks any help suggestions
Back
Top