Search results

Dont get me wrong, i am not looking to be shaking windows and setting off earthquake sensors 3000 miles away with this but i would like a mild upgrade to the sound system in the discovery. the issue: i currently have a 04 TD5 with the full harmon sound system, running via the HK amp and...

After looking through most of the threads on here (sierraferry's explaination was golden). I drive a 2002 (sept 2002 registered D2 TD5 auto) which did not come with the CDL but have fitted an early model (one CDL Switch) transfer box and it's only (apparently) got wiring for the V8 transfer...

I have aquired a set of D2 electric folding wing mirrors. i am of the understanding that the wiring is in (mine are heated but not leccy folding) and that on the electric folding version you push the switch down when it's in a neutral position and they will fold in/out. My question is, is...

I hav a zf autobox on my disco 2. at some point some cowboy removed the default oil cooler (and bodged the lines) they have been replaced by me and an aftermarket mocal unit has been fitted in its place. Does the ZF transmission's control unit account for oil temperature (and changing...

65% of the time the reversing sensors on the disco work extremely well. occasionally, however, when driving along (and not reversing or doing anything with the rear close to stuff) they will start beeping, slowly increasing in speed until you get the solid beep as if you are close to...

Want to fit a 2inch spring lift kit (spacers) to aid a few of my local pay and play sites. I intend to leave the SLS intact, but a quick question before I break out the trig and calculate it. how long does the SLS sensor extension bar need to be?

Very quick question here, D2 auto-box.. is there a detente between D and 3rd gears? or should there be. i have had a look at the little toothed strip that prevents the gear stick from being moved without pressing the button, but it appears there is nothing between 3 and D on the lever...

Little background first: when i purchased my td5 auto it was cheap, but in overall good condition. as a result of the price there were a few jobs that needed doing. one of which was the oil cooler for the AT box, at some point in the past the AT box cooler had failed and been replaced with...

Needed.. anyone breaking a TD5 or similar D2 facelift? i am gonna be changing the pads and discs on the rear this week coming and may need a rear caliper if i cant free it off (i think it's binding) does anyone have a passenger side rear caliper from a disco 2 (or possibly p38, i believe they...

ok, i know i am probably going to get 3000 people saying "just buy springs" but currently the sls provides me with a nice ride and unless it goes wrong (which it invariably will after this post) i am not gonna fix something that aint broke.. my question is do i need extended brake lines, i...

So... on sunday whilst going to pick up a nurse for my "i am looking for an excuse to bimble around in the landrover in the snow" moment, my in tank fuel pump shat itself. - cue me replacing a fuel pump at 10pm, on the side of the road, whilst it was snowing and -6.. joy.. bear in mind that...

So.. in doing some reading around, and quite liking the OEM look of the factory stereo (have the basic model with the 6cd changer), i am opting to bin off the CD changer altogether. In my reading i have discovered that it is possible on mine (2003 D2) to ground out the signal wire and make it...

Exterior ambient temp sensor on a disco two, specifically the one that feeds the info to the display of the ambient temperature when you press the ext button on the dash AC controls. Where is it? Because it's either moved against something warm or is faulty as I am pretty sure over the course...

Might seem like a silly question... But lr part number for the zf transmission level plug? And does it require a specific tool, or is mine just rounded, currently I use the universal nut removers that are my mole grips atm

This was an obvious side effect of the egr blank, as mine was fitted with a cooler (15p), the engine now takes longer to warm up. Now this begs the question about a coolant in line heater, dunno what they would be officially called by my Peugeot (2.0hdi) hasa non cooled egr, and a small block...

Driving a 2003 td5 auto, was doing this before an oil change in the box (without filter change). occasionally when hot (ie i have driven it, and then popped into the petrol station to remortgage my house and pay for fuel) i will get back in, start it up and go to pull away and it will...

So reading around the internet i came across this http://fritzing.org/projects/land-rover-discovery-2-sls-adjuster its a hard wired controller/switch that allows manual in cab control of the SLS that has the same function as the plip, and works by emulating the signal the PLIP would send to...

very simply what is the running pressure of the auto box cooler? i am looking to do a little "home modification" to the oil cooler (as some moron fitted an ebay special 6 row cooler (looks like one from the back of a fridge) and jubilee clipped the hoses to the steel pipes at the autobox end...

so.. options for an aux input are simple in my mind, obviously i am limiting my costs, specifics oif the vehicle are 52plate td5 disco2 facelift, basic tape deck with CD changer. it DOES have parrot AR fitted for calls which i would like to retain, unless option 3 is the simplest as it will...

One of the issues with the TD5 I purchased with an absolute bodge of an oil cooler fitting, I assume at some point hte cooler failed and to say the previous owner cheaped out is unreal, the original steel pipes have been cut about 10-15 inches away from the autobox just before where the pipes...