Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. L

    Leaked, new Britpart front calipers seals and pistons. defender 90 with 46mm pistons.

    Hi All I just fitted the above. Three of the four seals on one side leaked ( badly). The leaks popped the dust shield covers off! I replaced them with Bearmach seals, which felt tighter against the pistons (same pistons as supplied by Britpart), and these are fine, no leaks. Anyone else had or...
  2. L

    Classic 89 Range Rover heater box

    Hi All So, 'Im refurbishing the heater box in my 89 Range Rover. New core, foam seals etc. Ive noticed that one of the control linkage rods is loose where it joins onto the flap. Just seems to be a friction fit with splines onto the flap. Are these really just a tight push fit?
  3. L

    300TDI hard to start after standing for a few days whilst not much fuel in tank

    Hi all The issue mentioned above is due to fuel draining back to the tank. The spill line is airtight. Could this likely be caused by leaking NRV in the lift pump? Its an after market pump. Thanks for any help.
  4. L

    I think I've an air leak! 300tdi

    Hi All So, when the fuel tank is half empty or less and the vehicle has stood around for a few days, starting can be troublesome. If the engine doesn't start immediately, it takes a lot of turning to fire it into life. I'm think there's an air leak in the fuel line, which is causing fuel to run...
  5. L

    89 3.5 V8 throttle position sensor

    Hi All Has anyone found a neat alternative to the TPS (ETC 5598). It seems to be an obsolete item. A few companies are offering an ETC 6443, but at silly money, and this part number refers to a Canada Mexico spec engine. Any help greatly appreciated.
  6. L

    Central locking actuator for rear window (89 Range Rover)

    Hi All The above seems obsolete, so time to try a repair. Its a plastic sealed unit with a seam down the middle. Has anyone successfully dismantled one of these? If so, how? Thanks for any help.
  7. L

    Range Rover classic (89) heater matrix pipes

    Hi All I'm struggling to identify which is flow' and which is the return pipes that feed the heater matrix. Its the pipes that run along the camshaft cover. They both seem to get equally as hot. Does anyone know which is which?
  8. L

    Centre silencer delete pipe

    Hi all, I've seen quite a few companies offering a delete pipe for the 300tdi centre silencer. Apart from presumably sounding different, is there any advantage in using this? Thanks in advance for any help.
  9. L

    Help with this colour

    Hi All I own an ex coast guard Defender made at the same time of the one in this pic. D oes anyone know what the blue colour name or RAL number is? Also, during this year does anyone know the name of the white colour used on Defender roofs?
  10. L

    300 TDI fuel lift pump

    Hi All Can anyone confirm whether a 300 TDI lift pump incorporates a NRV? I have an issue with starting if the car has stood for a few days or more, but only when the fuel tank is less than 1/4 full. I'm wondering if the fuel is running back to the tank due to a faulty non return valve...
  11. L

    1994 300 TDI trailer socket wiring

    Hi All Does anyone know where the earth and indicator wires from a trailer socket connect into the wiring loom of a 90 300 TDI?
  12. L

    New to this forum

    Hello everyone, just joined up after buying a defender. He's an ex coast guard 1995 90 300 tdi with only 55,000 miles on the clock - all mots prove this. I've spent the first week changing Lubes, cambelt, waxoyling and generally Fettling. Great vehicle.
Back
Top