Search results

Good evening all. So I finished rebuilding my steering box this weekend and doing so has raised two points.... Am I right in thinking that there is nothing stopping oil pi55ing out of the unit past the upper bearing (admittedly it should never be able to do this because gravity will always be...

Hello Rob, that's ace. Any idea how much I should put in the steering box? Cheers

Excellent, right I'll get some of that ordered. How much do I need to put in? A bottle is 370g. Thanks so much for getting back so quickly, much appreciated!

Good afternoon all, I've scoured the threads on LZ but I can't find anything about the type and amount of oil you need to put in a series 3 steering box after you've rebuilt it. Also, I've greased the bearings with a standard Castrol bearing grease but I was a bit concerned this might react...

Ahh I see, I found those but because there was no "add to basket" button I thought they must be out of stock. Turns out LR Fasteners haven't yet set up an online shop! They also have the joint washers which is splendid. Cheers. Olly

Hello all, I am struggling to source replacement driving member filler plugs and washers for my series 2a. The Landrover part numbers are 276039 and 232038 respectively. If anyone can point me in the right direction that would be most appreciated. Cheers. Olly.

Good morning all, I'm getting close to being in a position where I can re-paint my series Landy and I've been looking at paints... I think I'm going to go with Pastel Green and I have looked at a couple of suppliers, namely The Paint Man and Paddocks (HMG paints). I'm planning on spraying the...

Ahhh hah! That's very interesting. I was potentially mislead by this because there are other components in the assembly drawings for the rear hubs (from the series 2A parts catalogue) that are 6 figure numbers all starting with '217' (please see below) so I just put two and two together and...

Hi guys, I had a look at the outboard hub bearing inner race last night - the following was written on it: Timken 11162. I believe this is an imperial bearing, so its looking likely that I have series 2A hubs. I'm still a bit confused as to why I can't find that hub part number in any of the...

Hi Phill, thank you so much for your reply. I will check the bearings tonight (they are at home). Olly

Hello all, I have scoured both the series 2A and series 3 part catalogues trying to find out what vehicle the hubs on my landy originally belonged to (so that I order the correct bearings, hub flanges and hub flange bolts for their rebuild) but so far I have drawn a blank. Visually looking at...

Yet another identification post I'm afraid, this time the gearbox. I have found various numbers on the various casings as follows: 25381680 E HDA 3 539788 528237 B VAF LM22W HWV Gr8 Pleas see picture attached to this post to see where I found each of the numbers. I'm thinking of removing the...

Stretch you legend my Landy is an E plate. At least something with this vehicle appears to be straight forwards! Thanks so much for the reply. Olly

Puddle jumper you're spot on, the chassis number is what I'm after (because the car pre dates VIN numbers). I got a professional HPI check done and the plate matches the chassis number which is a start. Nothing dodgy flagged up with my search and since I posted this I have found an almost...

I think I'm making progress here, I just found the chassis number which is 24138723C. This correlates to a series 2a 88" Petrol model, which is roughly what I have. If I check the number plate on the DVLA website it also correlates to a series 2a 88" Petrol.

The V5 has been lost and the only old MOT I have has only got the chassis number on it and not the VIN number.

Hi Bobsticle, thank you for the feedback, my reason for posting is that I have contacted the DVLA already (I want to make sure everything is above board) and they have asked me to confirm the VIN number - this is when I realised that my bulkhead had been replaced and the VIN place from the...

Hi guys, I am trying to get a new v5 for my series landy the issue being the bulkhead was replaced at some point (from a donor vehicle) and the VIN plate was never replaced. As such I've got a short wheelbase landy with a VIN plate that says it's a long wheelbase! Any help very much...

Hi guys, thank you so much for the info. Now I need to find some pictures/details of what it would have looked like in its previous life. Cheers. Olly

Righty I've just had a look at the old girl and the engine number is S23600055A. Cheers. Olly