Search results

Thank you for sharing you knolage. I appreshate the help I shall greese the mechanisms check the breather and monitor the oil coming through. Then replace the oring as required.

Thank you for explaining this. I fort maybe someone had filled it up. As I found very little if no greese in there. So normal everyday greese fine to use? Also would this effect the transfer selector too as that had oil in to. Or are they joined?

Can that much come up from th box It was full above the yoke gasket hence it came rushing out as I ligted the hole assembly as one. On one of my other posts I think I have a pitcture. Normal lithium greeae in yoke with the cup? And for the transfer selector? Can I change this oring easyily or...

Today I went to change the plastic cup under the gear leaver/ stick and found the turet/ gear cup /yoke. Houseing full of oil to lubricate the mechansum. (oil went everywere haha luvkily tunnel was ouy) My question is is this normal I was expecting greese. And what should I put back in. Same...

Hi ibe just changed the clevis. I had to remove the transfer mechanism hosing, to remove pins. I found it was very stiff so I vleaned it and lubricated it. Seems much better. It seems to work. But yet to try it on the road just backwards and forwards on the drive seems to change ok. With a...

Thanks im getting the picture it maybe trail and error. Thanks for replying this has given me a bit more confidents to just give it a go. Im hope it was bad because the clevis was slowly banding and stapping for a while now. Il set it the same then go from there.

This sounds like a plan. But getting it back in high range from low was allways tricky it would bang back out. This being the cause of the brakadge. But going into low range was always easy.

Hi im new to landyzone. I live in dorset and drive a defender 90. Which ofcorse has had doese and wilk have work needed doing or done. Haha. What im trying todo this weekend is change the clevis on my low / high range selector to the transfer. But what I cant find is how to adjust it correctly...