Search results

Hi all. Been a while been cracking on with the 1999 P38 gems 4.0 - was pretty sure the MAF was dead so got a new one. Just plugged it in and got 0 lb/s - is the wiring dead? Same on old and new sensor. All other readouts are good. Usual MAF issues like misfire under heavy load and grumbly idle...

If you're getting a jerking, lurching sensation when changing gear (2.5 v6 jatco) in an auto then i suggest changing the oil. Provided you can get the plugs and official oil it's super easy and the fl1 now changes gear like its out of the factors. You'll need a 24mm and 14mm socket which not...

OK - a frustrating problem on my 2004 KV6. Saw the error P0340 on my OBDC after doing a thermostat swapout. Accoring to the Rave this is "0340 CMP sensor Open circuit/no signal" it also states that the engine wont start and that there will be a warning light on the dash.... the car starts and...

I've recently swapped out my thermostat (supprise supprise) and done the manifolds, fuel rail, injectors etc. To resolve a misfire. When doing it I found a connector that wasnt plugged in - its a 5 pin connector with 4 wires that seems to come from directly below the battery holder - it has the...

Hi all. I am struggling to find a decent pin out for an 04 freelander, KV6. I just went to plug in the ODB2 connector and noticed wires hanging out. If anyone has one and would be good enough to take a picture of the back of the connector I would be very appreciative of the help. For those who...

Hello one and all - I'm from near Wool in Dorset. Have a facelift 2004 freelander 1. Am getting to grips with the RAVE manual and am quite used to playing about with engines.... the KV6 however seems to be a fickle little beast. Rest of the car is in quite good nick - need a bodywork repair on...

Hi all - new to the forum - I am looking for a part number for a vacuum hose that looks different to every manual and picture I've seen, Most it seems go from the bottom and then right, whereas mine goes bottom, right AND left. As you can see I've bodged a repair as the previous owner cracked...