Search results

Hey guys, Currently have a couple issues with my manual disco 2 TD5. The first issue is selecting 4th gear from 3rd takes abit of a movement up and down to get into gear. I have changed the bias plate along with the transmission fluid and it hasn't really seemed to help. Going from 5th to 4th...

Hello, My discovery 2 Manual is suffering with some gearbox issues. 1st,3rd and 5th work as they should no issues with selecting them or them popping out of gear while driving.. 2nd gear some times pops out while driving, 4th gear is a little tricky to get into and reverse is probably the...

Hello, Has anybody got any suggestions for a welder to do some work to my disco 2? Based North Liverpool. The car needs quite abit of working doing including both front inner wheel arches, drivers footwell and one of the sills needs repairing. If anybody knows anyone please let me know Thanks :)

265/75/R16 BF goodrich Ko2 All terrain. Never seen tarmac, steel wheel is also brand new £90

Quick clear out: Defender 200tdi Radiator Frame £60 Defender 200tdi Thermostat Housing £20 Defender 200tdi Alternator bracket £40 1 Brand new steel rim with brand new BF Goodrich all terrain tyre Ko2 265/75 R16 £100 Location: Liverpool, will post everything besides the wheel Thanks

Hi, Tried to change my pads today on my 90 but ran into a few problems. The pads were very hard in place, i did eventually get them out but I couldn't move the pistons back at all to put the new pads in place. With the pads removed a pressed the brake pedal a few times to move the pistons out...

1988 Landrover 90 for sale. Currently has 178,000 on the clock but the engine has been convereted from the original 19J to a genuine defender 200tdi engine with only 80,000 miles covered. Mot until November next year. Galv chassis put on in the past which is in great condition with no rust or...

Looking for a water pump pulley for a defender 200tdi engine. Part number ETC4785 Does anyone know if any other pulleys are suitable? Thanks

Looking for a ribbed roof for my 90 pref in the northwest area Thanks

Hi Guys, Changing the timing cover on my 200tdi and was wondering what else should be done while its off? Is there anything else that might aswell be done while am there, and what seals should defiantly be changed. Any help would be great Thanks

Hey Guys, I have just bought a wipac led light kit for the 90 and need to find the correct tool to crimp the connectors. I had to buy these...

Hi, The down pipe on my 90 needed replacing, so ive cut the old one out. I am pretty sure I am going to have to remove the cross member in the chassis to put the put back on. Is there any tips? as up to now it wont budge at all which I presume is due to the chassis pushing against it.

Hello, I am changing the bushes on my 90 and have just got the bush kit(83-93). When I put the bush next to the radius arm the bush looked way over sied for that arm but I am not sure if it is suppose to be like that. I was thinking that maybe I ordered the wrong type for my vehicle. The 90...

Hi Guys, I have a 1988 90 which has had a 200tdi conversion. The whole engine is out of a defender but it has a discovery timing cover on it which means that the belts, hoses etc do not align correctly. I am wanting to change the timing cover to complete the engine to a full defender 200tdi...

Hello, I am looking on getting my 90 ready for a new spray. Was wondering from people who have done theirs what things to replace when getting it done? I plan on completely getting new hinges, seals etc.. but was wondering what else should get done. Any help would be great Thanks

Hello, The whole dashboard in my 90 is looking bad and broken in a few places. I am looking at getting a td5 dash to replace it. Does anywhere sell them? and are there any modifications needed to be done Thanks

Hi, The clutch in my 90 needs replacing but I am getting quotes from around 350-400 to have it done. I was looking at Beardry89s post which is very useful ( although photos have been removed :( ) and it does not look like a too complex job. How many people have done it themselves? and how hard...

Hi Guys, I am looking on getting a aux fuse box for my ninety.. I have been looking at a few and like the idea of having 2 different blocks one for ignition feed and the toehr for constant. I have been looking for a guide where it will tell me what type of cable should be used and about fuses...

Hello, Tomorrow I am going to be fitting some daytime running lights to my front bumper. I have the kit and I need to connect 3 cables. Red - Ignition feed so they are only on when the engine is on black - negative white- Connected to the side lights so they turn off when the side lights are...

Hi Guys, I have this dilemma ( probably the same as a lot of you guys) of whether to replace my doors or just weld and re skin them. The bottoms of both my front doors on my ninety are gone pretty much so I have bought a replace plate for the bottom to experiment with as I know a welder. I...