Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. Peter Edwards

    Disco 2 auto gearbox won't engage reverse

    Did yours show the M+S lights? Mine doesn’t show them at all...was wondering if yours was flashing or anything like that
  2. Peter Edwards

    Disco 2 auto gearbox won't engage reverse

    Did it take long? I might need to do that myself
  3. Peter Edwards

    Disco 2 auto gearbox won't engage reverse

    Was it easy to remove the XYZ switch and do the repair...well clean inside it?
  4. Peter Edwards

    Disco 2 auto gearbox won't engage reverse

    Hello Dave, I’m afraid not!!! It is still happening....I got a feeling that the pack within the auto box is on its last legs :-(
  5. Peter Edwards

    SRS light on

    Easy fix so nothing to worry about. I had this issue on my Freelander and disco.
  6. Peter Edwards

    Discovery 2 Td5 misfire and cut out

    Also....oil in loom and ecu can cause issues
  7. Peter Edwards

    Discovery 2 Td5 misfire and cut out

    Hello, yes this can cause the issue you are facing and also a fuel pump that's on its last legs.
  8. Peter Edwards

    M & S switch flashing.

    Hello, you have done the best possible action other than open the unit and clean with new seals. I know many people who have had this issue and after why you have done it's gone on for years without an issue.
  9. Peter Edwards

    SRS light on

    Under the seat is a connector...they can show fault due to moving the seat back and causing either the wire or connector to come undon. The other is due to dampness getting into connector. I would advise having a look under the seat and seeing if you see any loose cables or connectors. If so...
  10. Peter Edwards

    Disco 2 auto gearbox won't engage reverse

    Taken it for a little test drive and noticed it works and responds like it should in low gear...when in high it's sluggish...slow off mark and does what I said above with reverse. Did the same thing when I started it....in high...in reverse foot flat down and staying at idle rev...nothing...
  11. Peter Edwards

    Disco 2 auto gearbox won't engage reverse

    What is a a rough cost of that? Cheaper than a second hand box?
  12. Peter Edwards

    Disco 2 auto gearbox won't engage reverse

    Ok will do guys, thank you all for help. How much are clutch packs for the disco?
  13. Peter Edwards

    Disco 2 auto gearbox won't engage reverse

    I have it booked in tomorrow. Just don't want to be taken for a ride. Does the automatics have a built in clutch? Would it be something to do with that??
  14. Peter Edwards

    Disco 2 auto gearbox won't engage reverse

    Yes mate but wanted to see thoughts first. It's all cost at the end of the day...cost me arm and leg for recent work :-(
  15. Peter Edwards

    Disco 2 auto gearbox won't engage reverse

    Hello all, for some reason it won't let me post a new post. So this is the issue I have.... I have a disco 1999 auto... I noticed that going up hills it's very sluggish and hitting 3500 RPM and doesn't seem to be pulling... This morning I went to reverse and foot was flat down and I had no...
  16. Peter Edwards

    Freelander 1 Turbo on its way ??

    I would agree with you on this
  17. Peter Edwards

    Freelander 1

    Have you checked the drop link arms?
  18. Peter Edwards

    High Revs

    Hello all, I have a 2003 Freelander TD4 and I'm having some issues. When driving I have noticed that when I put foot down the revs will run high but no pick up. This seems to do it when going up hill...like the gear is slipping. I have done the following check: While driving down the road in...
  19. Peter Edwards

    Freelander 1 2001 TD4 won't start

    Hello all, I have managed to get it working. Spot on with the O ring on the HPFP regulator. Thanks once again all!!!
Back
Top