Search results

just dont overtighten as you will put to much strain on the bearings on the alternator pulley a good idear is to clean alternator with fresh clean water and then try and get some general purpose oil on them i use 3-in 1 oil as i find wd 40 for the bearings is to light but great for the...

hi Murkster just read this hope this helps the light comes on in water when you get the alternator wet also with missing teeth on belt it will cause it to slip and no doubt break apart very soon the other belt is your power steering belt and the reason your steering goes stiff is because...

hi i was competing in the scorpion racing novice challenge and was tryin to position vehicle to reach a punch very slippy and back right slipped into large rutt and front end was on the bank all went over slowley all ok i managed punch in end and got another 3 after and one the fastest wheel...

hi has anyone got a spare drivers side passenger window for a 3 door discovery need one soon as pos will buy off you regards colin

hi mate i think its the trim levels cloth/half leather ect..

have you tried holding with a pipe wrench and soaking nuts in wd40 thatl work:rolleyes:

HI HAVE a look at www.scorpionracing.co.uk they do a great 2 lift kit which will include springs and gas shockers regards colin

try www.scorpionracing.co.uk they also ship world wide is where i got mine from regards colin

hi guys sounds like one of your shockers has gone or you got a bust front spring both easy to do if you check out underneath and look at the bottom of the spring where it seats thats where mine went but also check shockers while you got it all apart just be safe regards colin

hi i belive it is 0.20mm goto do mine soon regards colin

know how you feel mate just had a quote to do my engine crankseal gonna be a slim wallet for a while:eek: had to ground truck for while as i took all steering of to replace as many bits as i can befor challenge is getting there inch by inch taken all bumpers of and those pathetic plastic side...

thanks mate im pixxxx of now gonna have a beer :D

is defently engine oil whats the best way to drop box never done befor is it props of both ends take cross member out what about special tools or is it just nuts n bolts job

hi any body know how to change the oil crank seal on a 200tdi discovery automatic think mine is gone sympton changed oil other day befor that drained all sump and took bell housing plug out met about 2 litres oily mess let it all draion out put the wading plug back in the bell housing took for...

just out of intrest tim what items you got missing from engine and if you send me your address in private mail will post you the lapbelt out will have aword with a mate who might have some spare parts knocking about wont see him till sat/sun though

gona need a new one soon anybody know where i can get a 100amp plus alternator from need to power winch and twin batteries ect.. any help

i know sounds silly but have you checked that the gear is in park and not in a gear as it wont start if in gear on automatic just a thought

also k&n filter you just replace dont need to adjust fuelling but disconnect the emmissions pipe running to the filter box/pipe as this will cause dirty bad breath oil from engine to ruin your nice new k&n just drop onto chassis somewhere and block hole up at filterbox/pipe done same my 90...

hi tim ok lapbelts www.paddocksspares.co.uk seats from same get your bumper from www.scorpionracing.co.uk and im sure they also do a cleaning fluid for engine you will find these bumpers are made quality they do both winch and straight forward bumpers and extreem tube bumpers and can all be...

hi anybody got any pics info or advice in setting up a twin batterys to power a winch regards colin