Search results

Hi people, New problem today, my 200tdi starts but as soon as I let the key go back from the start to ignition position it stops. Seems like its not staying switched on even though the ignition switch is on. Is it likely the switch or is there some sort of solenoid in there that coild be playing up?

This vehicle was stolen from a private driveway in cuxton, near strood, kent. Police informed. Vehicle is white but distinctive since it used to be a st johns ambulance and faint evidence of the signwriting can be seen on the sides. Also unusual in being n reg but a factory 200tdi. Please...

Had a problem with the window regulator on 1995 110 middle row door, wouldn’t wind down, basically jammed. Took it apart, cleaned/greased the winding spindle, now it winds up and down but you can push the glass down (and up) with your hands. I can’t see what part of the mechanism is meant to...

Couple of us planning to do Caerwen/strata next Saturday if anyone fancies joining, hopefully we won't all end up being April fools. Shout if interested. Ads

Has anyone had a go at repairing their bulkhead with the new extended repair panels that cover the vents? My bulkhead is pretty poor including around the vents so fancy these but am interested to find out how easy they are to weld in and get them nice and straight. Looks like some sort of jig...

Is snyone planning to do a Morrocco overland trip in 2017?

I have one of these up for grabs, free to collector if anyone wants it. Its in good nick. Fits vehicles with 10j, 12j and 19j diesel and 4cyl petrol. Located rochester kent.

Lads, Struggling here, I have fitted the above to my lightweight but the location seems to be wrong, the gearbox is too far back and i can't fit the seatbox. The location of the engine in the engine bay looks OK though - it couldn't really be moved any further forward as the c/s pulley boss...

Guys, when I removed my fuel filter mount from the bulkhead of my 1985 110 a while back I seem to have dislodged whatever nuts were on the bulkhead that it bolts in to, all I have now is two large holes in the bulkhead and nothing to bolt into. It seemed like there were some kind of nuts that...

Lads, has anyone in the north Kent area got a beam type torque wrench I could borrow to do my 200tdi cam belt tensioner pulley? I can't seem to locate one with the right torque range for any reasonable price. Alternatively, can I just tension it using my click wrench set at 18lb/ft and do up...

I have an early 110 with the two piece speedo cable, which is knackered, and they are hard to find. Can I replace it with the later one-piece item PRC6022? Not sure if this will fit or if there is any difference in the fittings at each end. Cheers Ad

I'm after the plastic shroud that covers the radiator - viscous fan gap, defender 300tdi one would probably work as well. Anyone in the southeast got one going spare?

Lads, Front diff went bang at the weekend :( I have a couple of spares someone gave me but not sure of their condition, they look ok but how can I tell if they are mechanically good - are there some simple checks I can do? Did a search on this but not really any obvious pointers. Its a 1985...

Anyone got a set of these lying around left over from a fender tdi upgrade - I need the whole thing, the bracket that bolts to the block and the mounting rubber piece, for both sides. Ad

OK, so i got my old input gear out, and have the new one and new bearings ready to fit. The original bearings on the old input gear actually look in fine condition - but I can't see how on earth i could ever get them off to swap em over, there is hardly anything to grip with a puller. Any ideas...

LAds, just popped disco 200tdi in my lightweight, fits in but the turbo outlet is very close to the nearside inner wing (see pic) so i can't connect it up. Had a search but no-one else seems to have had trouble with a SWB series so not sure whats happend here. Whats my options here, can i turn...

As above to fit to my lightweight for a five speed conversion. Need floor panels as well. I'm in north Kent but would pick up from home counties. cheers Ad

Guys, just replacing swivel balls etc, how far does the top bush have to be hammered into the swivel ball - can' t seem to find an answer on here and i' m concerned about getting it in the right position and square. Cheers, Ad

I need to replace the input gear on my tfer box (as per above), just did a search which suggests that it is not as easy to remove on the 1.003 ratio box as it is on the defender 1.41 and 1.667 ratio ones. Does anyone know what the difference is?

Can some kind soul tell me where the rear axle breather pipe should go to on a 110, mines just been dangling around for ages. I want to get it higher up it would take miles of tube to get it to the engine bay. Ad