Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. reject86

    R380 difficulty selecting 3rd and 5th

    To be honest i dont have the equipment or space to be able to do this but wish i did. However on a brighter note i have sourced a good used box for a really good price.
  2. reject86

    R380 difficulty selecting 3rd and 5th

    Yeah i think thats the way in going to go. However i would like to keep my gearbox and strip id down to see what actually went wrong, i think ashcroft part exchange or you pay a higher price but will have a look into it. Cheers
  3. reject86

    R380 difficulty selecting 3rd and 5th

    Just an update for anyone interested, removed the gear lever cover today to inspect the yoke and linkage. I was hoping that either the torsion sping had come loose or the grub screw had worked its way loose, im sad to say that its none of these easy fixes. Looks like its a box off job. Now to...
  4. reject86

    R380 difficulty selecting 3rd and 5th

    Update... Drove less than a mile from home I now only have 1 gear, unsure as to what gear it is but it's a forward gear. Got me home. The gear selector is moving into the gear positions but it won't disengage from the gear that it's in. I have had to put th transfer box into neutral to move it...
  5. reject86

    Is it the water pump?

    Oops yeah scratch that this isn't a series 3:oops:.
  6. reject86

    Is it the water pump?

    if you can't feel hot water in the pipe to the heater matrix I'd look at the control at the valve end, ensure that it is working fully in both directions when the dash lever is operated? Maybe the matrix is just silted up - new ones are only about £35.
  7. reject86

    drop arm changed, steering wheel out

    just to follow on, i removed the steering wheel with out any real effort, replaced in the new position and is totally fine. thanks for the advice guys.
  8. reject86

    R380 difficulty selecting 3rd and 5th

    hi all, as the title states im having difficulty selecting 3rd and 5th gear on my 94 300 tdi defender with r380 box, to let you guys have a little more information on it; over the past month i have been loosing clutch fluid, i think this is down to the slave cylinder as there is no fluid seaping...
  9. reject86

    drop arm changed, steering wheel out

    Thanks for all the advice lads, had the drop arm off again last night made sure the slot on the back if the drop arm and steering box ligned up. All back together and the steering wheel is still in the same place, i wonder if a previous owner had removed and re placed the steering wheel at some...
  10. reject86

    drop arm changed, steering wheel out

    The ball joint on the origional had far to much play. It was not bent at all.
  11. reject86

    drop arm changed, steering wheel out

    Hi lads I think i have a good idea here what i need to do but just want to check before i go ahead and do it. I replaced the drop arm on my 300tdi 90 yesterday. I was very fortunate that it only took an hour and came off with a puller, anyway after installing the new drop arm and making sure...
  12. reject86

    prop shaft pcd? for diy flange wrech

    Hi lads just wondering if any one knows off the top of their head what the pcd or distance between centers is of the front prop shaft, I would think that it's the same for front and rear but if not I'm after the pcd/centers of the front prop (transfer box flange side) The reason I'm asking now...
  13. reject86

    low volts at cigar lighter??

    Thanks, it's still low on the wire itself and without removing the dashboard I can't trace the wire back, splicing I think is the way I'm going to have to go thanks
  14. reject86

    low volts at cigar lighter??

    Hi lads 300 tdi defender has low volts at cigar lighter around 8 to 9 volts (green ignition wire), if I connect any accessory to it there's no power. Battery is reading 11.5 to 12 volts. Power to light on cigar lighter reads 11 to 11.5 volts. What could be causing the low voltage? There is...
  15. reject86

    wire identification

    Yes I had my multi meter on both the wire that powers the cigar lighter and inside the cigar lighter, both reading 9 to 10 volts, also for peace of mind i checked the power lead to the light on the cigar lighter which works fine, this was reading 11.5 volts. I have not checked the battery as of...
  16. reject86

    wire identification

    After checking through the wires I've found that the cigar lighter is only putting out about 10 volts, I assume it should be closer to 12 as I can't get anything to run from it. I have checked the fuse which is the correct size, now I'm stumped? Any one had a problem like this?
  17. reject86

    wire identification

    1994 defender 300tdi thsnks
  18. reject86

    wire identification

    Good afternoon chaps, it's nearly the weekend so time to tinkle about with the defender. The issue I am having is that the 12V cigarette lighter won't work, (phone charger) Opened up the plastics on the dashboard to diagnose problem, I have power in the form of the light bulb that runs to the...
  19. reject86

    timing belt kit early or later for my 1994 defender?

    Thanks for the help lads. Ordered and on its way.
  20. reject86

    timing belt kit early or later for my 1994 defender?

    That's paddocks for you, That would be great, could you recommend where to buy the kit also? Thanks
Back
Top