Search results

So, many years before i purchased my 1968 swb 88 someone fitted a rover v8. some parts of the conversion are good and some not. the bulkhead has been butchered and just made square to accept the gearbox bellhousing. i want to make it look as it should be there. footwells etc i can get but this...

Got myself a 1968 swb V8 converted Landi so never going to be as it left the factory again, which is part for some fun when not in the defender and other to restore as a modified landi chassis up. will prob go with a standard V8 colour but what paint would you recommend for the interior. needs...

morning all. i'm looking for the part number, or someone who has a pair of windscreen vents for my 2a. these would be the plastic type not the round metal type which sit on a type of extended dash. see picture below of what i need. thanks all.

So took the plunge at the week end, now a proud owner of a Series 2a swb V8. (SDI engine) a lot a work to do over the coming months but thinking have some fun with the roof off during spring. need to rebuild the twin SU HIF6 carbs tho. need a clear exploded diagram if any about. can get plenty...

hi all. anyone used a good company down south for galvanising there chassis? ta

many thanks for the info, want the look of the series, prob the 88 and keep away from old electronics so 3.5 or 3.9 running carbs.

thing is my td5 pretty much needs nothing now. not sure why people complain so much about td5's and leaks. mine now has no water leaks in and no oil out. lol need a real challenge.

So from the apricated comments it would seem the best options are. 1.find a series with a V8 as standard 2.modify a standard landi and add a v8 rover 3.5 / 3.9 i guess these would be from a P38 range rover? As said not looking to modify a 90/110 as already have 1 i use daily.

sounding expensive to start with....

Good point!!! Might have a look for a worn out V8 version and refresh the engine..

please don't hate me!! i'm a very bored engineer at present and need to get the brain working. i have a 2005 TD5 double cab as a daily driver fully restored. i like the series 3 look and thinking of getting one to restore ground up BUT want to put a semi modern V8 petrol in it. poss a lexus v8...

pretty normal on a defender in the sub zero temperatures. have problems on my passenger side. works perfect from spring onwards. normally someone has filled the lock mech up with thick grease. unfortunately the lock is a **** to get out. spray plenty of wd40 into the lock. and white plastic...

to replace 2 doors to second hand puma doors which wont rot like the standard td5's will cost you at least £1500 plus paint. some maps are Smokey but nothing to worry about, a good tuner can tune this out and still give the performance. mine is 2005 110 at 200bhp and only a tiny bit of smoke if...

looked at this with mine, was advised needed seats and seat belts fitted in the rear.

sp 4x4 replaced both mine and ignition to the later puma style. (longer key) never had any probs after that. https://www.sp-4x4.com/LR052050_defender_ignition_barrel_p/jwp4105.htm

thanks, couldn't find any threads only for the screw on top things.

yes mate

anyone tried fitting 1 of these. i dont need to blow air out the top to the windscreen so can force all out the side vents.

had enough of carrying alarm key fobs and car keys. just brought a new key with Lucas electronics built into the key. so unlocks / activated alarm etc. excellent service and works really well. 2005 TD5...

see link £200 repaired. had my td5 unit repaired by them and comes with life time warranty, https://www.ecutesting.com/product-catalogue/land-rover/defender/abs-pump-ecumodule-combined/