Search results

Strange one,set up the system pressures as normal and everything returns to 255 on both panels of program easy unlock. Have tried several times with the same result any ideas.

Have for sale the above,in good mechanical condition,new clutch 1000 miles ago and not used for 12 months,starts first turn of key. Chassis is good as is most of the body but scratched paintwork. Bad Points Door locks not working due to the pin on door lock having broken and the rear door catch...

I am currently taking my RR apart for spares,the gearbox went and I needed the interior for my 97 V8. If you are in need of any electronics they are all available as is the engine which has done about 80k and was in first class running order when I laid the car up 2 years ago.I will sell any...

My partner was having work done on her P38 including new calpers and brake pipes,so we ordered all on line,no problem with the calipers but when the brake pipes from foundry4x4 arrived the blister pack had been opened and 4 pipes were in the pack,my partner was not aware that there should be 6...

Anyone know if the p38 was ever fitted with a single exhaust rather than the twin for show,it seems that the single system was more efficient and was changed to reduce the noise after the classic. Thinking of using a single system to make it simpler,

Anyone doing door lock repairs for P38,Marty is away again so need an alternative.

Just heard from my daughter that her neighbour has bought a Rangie 1,from the last batch of 25.A special by all accounts. Paid £49,999 for it and when checked on dvla it had done 214168 miles before being rebuilt and re registered as a 2002 and clocked 1756 since. Has the world gone totally mad.

Can anyone tell me the thread size of the green coolant sensor on the 4 L gems engine. Intend to replace with a proper unit,anyone done this and can suggest the best setup,capillary tube pref.

P38 4L Gems Turn the key and the engine fires but immediatly stops,same for the next 2 tries 4th try the engine starts normally.Anybody have any ideas.

My 97 P38 had driven me to the point of scrapping it until Marty put me in touch with Richard,one phone call to explain the problems,BECM sent to him and returned, Plugged it all back in turned the key and my worries were over. Cant praise his service too highly and does not charge the earth...

I have a 2000 4L Thor Rangie which the gearbox has failed on. The interior has been removed and a few other bits but all electronics except instrument binnacle in place. Anyone interested in parts or whole car contact me,based in Wales near Cross Hands on the A48 Paul

Looking for a tidy p38 diesel Rangy 97 on

Yes another post re becm,have a 1997 P38 4L and the followingt is the problem. Drove the car a short distance without any problem,came back about 15 minutes alter and got the engine immobilised press key,did this and nothing happened,tried to enter the eka which is correct and the whone thing...

can anyone suggest a suitable transporter to collect a vehicle in Axminster and deliver to Llanelli Wales

Anyone know if he is back in the UK yet.

Anyone have a need for this,it is in good condition. Postage cost only.

Anyone know if and when Marty comming back to the UK.

Thought I would post this as it may help someone. My TD5 was suffering from intermitant starting and every check we made drew a blank,whilst changing the starter motor it was noticed that the sensor plug had been repaired,strange as we recently changed the sensor and it was ok then. The sensor...

Any kind person on here breaking a TD5 that could sell me a crank sender cable,the one with the plug and two wires.

Can you let me have some contact details.need your help with BECM Paul