Search results

Hi thanks for reply .Could somebody confirm part number seh100090 is right part for 1999 freelander1 brake carrier and does anybody have any please

Would brake carriers from W reg freelander1 fit 1999 model

I’ve put new pins in but still getting some rattling

Yeh I’ve seen those but they don’t fit . Why such a big price difference

220,000 1999 two head gasket jobs

Hi anybody else astounded by the price of brake carriers on freelander1 1999 1.8 looking at £150 for one anybody found way around this . part number leh100090.

Hi yes turns ok just changed belt because old one was cracked just squeals on start up been a right pain to be honest

Hi fitted a auxiliary belt to my freelander1 1999 with a/c and don’t seem to be able to stop it squealing on start up I fitted a gates 1163 is this the correct size please

Hi it’s not leaking at a joint but where a crimp is metal to rubber .Was hoping I could get a pipe made or repaired for much better price than the dealers.But I don’t know if I could get it done in Rotherham. I’m not sure if I have to take it all off back to condenser because it doesn’t look...

Hi keeping freelander1 1999 model on road , went to recharge a/c system this week as not working ,no pressure. So refilled and by time I got home empty had a look and low pressure side pipe has big leak.Does anybody know how to get it fixed or have one near Rotherham.it looks like a block on...

Is it possible to undo and take pulley off without problem , by undoing centre nut .

Yeh basically what I’ve been doing ,I think . .So I will have another go tomorrow thanks for help .

Do you have to undo the two small bolts just under pulley ? As I’m just undoing the middle bolt of pulley and trying to turn big bolt at bottom that’s inside the small block at bottom cheers

Hi nodge68 yes mate the bottom adjuster bolt is solid after having loosened bearing , I’m I missing something hopefully pictures up load ok cheers .

Hi I have freelander1 1999 petrol with a/c for my sins and just changed auxiliary belt but tried tightening the adjustment bolt and it’s solid i can loosen the bearing but I cannot tighten the main adjustment bolt or loosen it anybody have any ideas or got one for sale please