Search results

Own made.

My bad

got engine in, primed turbo, disconnected the fuel cut of wire, turned engine over till oil light went out reconnected wire turned key for 3 secs and it roared into life THANK GOD

If you are totally striping it down make sure you keep everything in order so you put it back as it was, ie which piston went in which bore try not to mix parts up

Yes mate used engine oil

I thought oiling the bore was ample. do I need to start againe or will they get oil when I turn it over?

the piston rings didn't need altering. I put them in the boar and pushed them down a bit with a piston to make sure they was level the gap was 0.40 top ring and 0.40 middle ring but I didn't oil the rings just the boar (idiot) I will check the piston heights james thanks

aup rebuilding my 200tdi defender engine, had the block skimmed and new cam bearings fitted also the boars honed. I've put new rings on the pistons after seizing the gap in the boar and the rings are the right way up and the splits are positioned in the right places I found it hard to turn the...

fitted new turbo

just found this out the hard way lol

went down a lane that is a byway between cross lane and red hill lane near Elkesley nottinghamshire grid ref sk670744 taken from os landranger map 120, at the end (Elkesley ford) there is a wood that as been used by 4x4's looks very well used. I was wondering if it is legal to go on it? is it...

ebay. seen loads at Peterborough show

managed to upload a pic of the aircon mount on a defender engine

the bit at the front of the engine where the air con bolts to are different on the defender it is at an angle and on the discovery it is flat.

does anyone else have a wandering knob problem ?

put a new gaiter on the diff lock high/low gear lever, now when I pull the stick across to disengage diff lock the leaver seems to flick back to the middle is that usual ?

did it last year and should be going this year, how much is it on the gate? I think its £13 pre booked

:fighting2:aup mate

aup I can only help at weekends due to working away all week if that's any use. I'm at somercotes J28 M1. I've got basic tools, spanners, sockets, welder, gaffer tape. I drive a defender 90 with a winch and tow straps. I'm near paddocks but they shut sat dinner. would do 30mile or more if...

cheers must be me then, from going on the course I left it in diff lock all the time with it being muddy maybe I should of kept taking it out to stop wind up?