Search results

Sorry for the late reply it turned out to be the map sensor the housing was full of oily crap so took off cleared it out with break cleaner and put in a new map sensor works like a dream now

ok so started changing a few more hoses changing the map sensor today see if that does anything, started her first time as usual as I said shes still fluffy and rpm's don't go over 2000 will let you know how I get on today

Ok thanks for the info I’ll try what you suggested on Wednesday once back on land get off the rig Tuesday will let you know how I get on

Hi sorry I put the car into drive foot on the accelerator revs a bit fluffy only way I can describe it get up to 15mph then that’s your lot changed the maf sensor and checked the hoses they felt soft so replaced them no difference all started when we had a down pore I was on the m62 motorway...

Hi guys Was on the motorway doing 80 mph then just lost power stopped start the car again but still no change nursed her back doing 15mph I’ve changed the hoses took her to the garage and the mechanic says there’s no signal from the crankcase to the auto box anyone know what I need I’ve bought...

do I need to bleed the system and if so were is the bleed screw thanks in advance

thanks for the info managed to do it was a tight fit a few ffffffssss and a few tools thrown about but managed it lol

hi guys decided to do the inline mod change read threw all other posts but my hose system seams different ive attached 2 photos which section do I put the thermostat into any help would be greatful

I Have the same problem when the engine is under load vibrates like mad but once at cruise speed no problem Ive removed my propshaft as the garage thought it was that (the centre bearings which ive change while its off. thought i'd test it while the prop was of and its still the same. No warning...

will be changing them round in the morning. its also going back to the garage to see if there is anything else i can do the centre bearings on the prop shaft were shot and the back bush was split. thats why we changed them. have now change tyres round and change the rear support bushings. but...

Hi Guys here's a quick run down of the problem. Needed 2 front tyres for my freelander so got them changed informed the garage to change them round fronts to rear. when i picked it up the tyres hadnt been changed the tyre man said the tread was the same front and back so he left it. after about...