Search results

I have a late model drivers door for sale. It is the electric window model and comes complete, including door card and all interior fittings, both hinges, mirror arm a brand new in the bag door seal and a complete stainless steel fitting kit. Window motor working perfectly up and down so can be...

Lowlifes came and stole my Defender last Wednesday night Thursday morning. Pro job I would say as both and my neighbour have dogs and they never reacted at all. Blanket thrown over the security lights on the drive. Reg No is R627 PST and it is Conniston Green with a white roof. Last of the...

does anyone know if it is possible to buy a new upper mounting bracket for the rear Spring and is it feasible to cut the old one off and graft a new one on? Vehicle is a 98 110 and it is o/s if that makes any difference?

I am reducing my collection so thought I would start withe the VfR as I hardly used it the past year. It is a non standard but interesting for it I think and would make a great commuter for someone. It is a 1994 FR model with 37,528 miles MOT until 05/06/2016. Spec is: 1994 Fireblade front end...

well I failed the MOT today as a small hole was found on the n/s chassis crossmember that fits in front of the fuel tank and the upper link arms (A frame) attach too. That small hole is now a big one as I have been tapping away at it to try and find good metal. YRM don't do a repair piece for...

My master cylinder is losing a small amount of fluid each week needing a small top up. Been like this a couple of months but clutch works fine, though twice now I have had to hook my foot under and help lift it back up. Can't find any wet under the m/c or pipe work and the slave too is bone...

I went to pull the back wheels today to check the rear pads and the O/S wheel came off with a few light taps with a mallet on the inside of the tyre. The N/S is refusing to budge. I have hit the tyre inside and with a lump hammer, lump hammer on a piece of wood directly on the back of the rim...

Does anyone know of a good way to straighten a door frame? I bought one as the frame is rust free but it bends out at the top and bottom and effectively needs to be bent in at the top and bottom to fit properly. Anyone done this?

I have a set of Wella steel modular wheels with 275/75 x16 tyres fitted. On the plus side 4 of the tyres are legal. Wheel one - BF Goodrich Long Trail T/A 8mm Wheel two - Insa Turbo Desert Track 5mm Wheel three - Insa Turbo Desert Track 4mm Wheel four - Insa Turbo Desert Track 2.5mm Wheel five -...

Hi - I have 4 x rubber conduit for running wires through doors to power window or central locking. These are factory parts with part number YQQ 000070. 3 are in the original Land Rover packaging and unopened the 4th I took out to look at trial fitting to my Defender but decided against it but I...

The door lock barrel fell out of my drivers door and I bought a replacement from a supplier on the Bay but they all seem to just have one type, part number RTC3032 which is shorter than my old one and doesn't have the threaded hole at the back. Can anyone tell me the part number for my old one...

Now Sold--------------Hi - I have a set of 4 x Disco 1 Freestyle alloys fitted with BF Goodrich 235/85 x 16 tyres. All 4 wheels come with the centre caps. I had the tyres fitted and balanced 2 weeks ago intending to use them on my Defender 300 TDI but they wont fit without spacers and I don't...

Hi - After a set of suitable wheel spacers and wheel nuts to allow fitment of Freestyle alloys to a 1998 Defender 110 David

I did do a search but couldn't see an identical wheel. I bought a set of these for my 1998 300tdi but they don't fit. Seller said he had them fitted to a 1995 Defender before he sold it and the research I did on here seemed to suggest that pre-TD5 Disco wheels would fit my vehicle. Can anyone...

Hi - I did a search on this but struck out. Does anyone know the size of the bolts that hold the door hinges on the 2nd row doors? Vehicle is a 1998 110 SW (300 TDI) I need to find some replacements pronto as I am having the b and c pillars replaced and they have had to drill out the old torx...

I am after a drivers side seat belt anchor (the part that receives the buckle) for a 1998 110 CSW. This is the part that bolts to the seat box using 2 bolts and holds the lap belt for the middle front set if fitted. Mine has broken the plastic surround around the part that latches which I am...

Now the short days are descending my lights have decided to play silly buggers. When I move the light switch I get side lights and a dull glow from the halogen main bulb on both side. When I move it to the second position to bring on the dip beam I get only side lights, nothing from the main...

I am looking to replace the viscous coupling as the bearing seems to have some play and I don't want it to make a break for freedom and trash my radiator so I have been researching on Ebay for the 300 TDI. My question is are the 200 and 300 (and indeed V8 ) couplngs the same unit? Some sellers...

Sorry I know I am posting this in the wrong place but I can't seem to post in the wanted section (probably because I am a newbie?) Due to a clumsy attempt to steal my Defender the steering wheel was cut to remove the security bar. I still have my LR but the steering wheel is now an MOT fail...

I replaced the rear door on my 110 this weekend with a new one I got from the seller when I bought it. Only when I was removing the rear high level brake light did I notice it mounts from two posts attached to the rear glass and the new door doesn't have these posts. Can I retro fit them and if...