Search results

Hi All, One of the rear side lights on the mrs disco 2 isn't working and it's not the bulb. The other side is working fine. I can see three wires going into the top bulb holder which is brake/side light but need a wiring diagram or some information to identify the wires used for the side light...

Evening, The battery light came on the TD5 this week. I tested the voltage and it appeared to be the alternator not charging. I had a spare new battery so replaced the one in the disco anyways. Called the garage, explained what I had done so far and let them at it. Their diagnosis was...

Afternoon, My mrs is experiencing power loss on her Disco 2 (TD5 Facelift). I replaced the injector harness last year due to a different unrelated problem. I've unplugged the MAF sensor but the issue persists. I've sprayed the wastegate arm to make sure it's opening too. The problem...

Hi All, Can anyone help me identify the wheel nuts in the pictures? They are fitted to a Defender 110. Thanks

Evening all, I'm going to look at a 110 that's had a disco 300tdi lump put in it but still has the defender gearbox and transfer box. Can anyone offer any advice apart from looking at the usual to make sure the conversion hasn't been done by a top banana? Thanks

Afternoon, I've got a strange problem on the mrs' disco 2 td5. It overheats but not on every journey. I drove 10 miles this morning no problem. On the return journey home a good few hours later the bugger overheated and got real sluggish. I turned the heater on full whack but no hot air. I...

So, it turns out despite sinking lots of blood, sweat, tears and mcuh love into my 300tdi disco over the years it's time for it to go to landy hell (the bastid). I looked at a D3 at the weekend and I thought, I don't want that thing full of electrics despite it looking nice. Instead (for...

Afternoon, I'm looking for someone that can do some welding for me as it's going to be way too costly to get done at a garage. It needs the two rear inner arches closing up at the tops and a small plate welding into the floor. Happy to travel a little bit but not to fookin Wales and...

Evening all, This might sound like a stupid idea but I'm thinking about fitting rear benches into my disco1. At the moment it's just in the form of a thought so I don't know if benches will fit, can they be mounted without too much difficulty etc etc. Does anyone know if anyone has done...

Morning all, I do a bit of hiking and I'm wanting to kit out the landy a bit more. I wanted to see if anyone else has made a custom boot door card and how they made it, what they used along with any tips. I'm wanting to fit one of these: As well as some sort of fold down shelf that I can...

Afternoon all, The battery light is lit up on my dash, nice and bright. I needed a new battery anyway so that has been replaced in the last week but the light was still on. I knew the tensioner bearing needed doing so have done that today along with fitting a new belt but the light is still...

Evening all, After deciding last year I needed something a bit faster as my daily, my poor disco got banished to the drive, was declared sorn and left to willow away. After putting the daily through it's paces I started to detect myself moving back towards my younger years of driving style...

Evening all, The rear bumper on my disco needs a respray. I'm planning to do it at home but in reality spraying has never been a strong point. Can anyone recommend a good black paint to use on it that's going to be hard wearing and can I get it in cans or not? Also, is it better to undercoat...

Evening, I've spent the whole day replacing the clutch, clutch plate heavy duty fork and a slave cylinder. After what seems an absolute ****er of a job, everything is back together but I'm stuck at the last hurdle! Trying to bleed the clutch system of air and not much is happening. There is...

Evening, I've just bought an ES valance as I want some fogs at the front. I've fitted it today and the fogs and checked that there was some wiring behind the headlights. Problem is, the connector on the end of the fogs is white and are two pin and the one behind the headlights is a black 3...

Evening all, I've got a feeling I may need a new clutch fork/clutch as the bite is very low to the floor, although the pedal does spring back up when I release it. Wasn't like that when I bought the car, the pedal was solid. Anyway, it's a job out of my league so I'm looking for someone with...

Morning, I've spent the weekend with a mate replacing the P gasket and water pump and gasket. After doing what turned out to be a bastard of a job we thought we were there. After running it last night we found that there was an air bubble to tried to take the bung off the top of the...

Morning all, I'm changing the P gasket today as my landy has been leaking for a while. I've got so far but can't seem to get the buggering PAS pump wheel bolts loose. Every time I try, is just turns round and I can't hold it tight enough. I've tried putting everything back together including...

Afternoon, I've found where my coolant leak is coming from. It's from the P Gasket. I've been doing some reading and it seems a common one. I've ordered a new p gasket, a new water pump and gasket, rocker gasket and water pump bolts. While I'm doing the jobs, can anyone recommend...

Afternoon, A couple of weeks back I managed to ditch the mrs and the kids for a while in order to get the headliner out of the disco. It came out without too much difficultly and I've already torn off the crappy material that was lining it. I've been wondering what the hell to recover it...