Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. B

    Strange one this !! won't turn off if lights on ??

    I would be gratefull for your thoughts electrically minded people, Disco 300tdi, '97 manual, manual fuel pump, vehicle starts and drives fine, no heater plug lights on dash, and turns off by key ok, until you turn on lights. Turn lights on and it carries on running even if key removed from...
  2. B

    Update: 4.6hse Water Gushing out

    Had a look with mirror and torch as customer poored water in today, it looks as if head gasket has blown out by freezing as bit of it sticking out, and on nearside rear head, may be inlet manifold but as a bracket in way difficult to tell, told customer needs taking apart to investigate. He is...
  3. B

    P38 4.6hse water leak back of head???

    Anyone know if this engine has core plugs or pipe etc in the back of head near bulkhead??? It pours water out as quickly as you fill it up, and appears to be from this area, the car had no A/freeze in it and has been stood for 3months or so so could have popped one out
  4. B

    You asked for quick waty to set TDC on No1

    firstly on the front timing cover left of fan is a little cover plate for the diesel pump pully. remove 3 bolts(M10 head) and you can see the pully, turn engine over on crankshaft pully nut (27mm spanner or short socket) until the biggest of the three holes is approx at 11o'clock, put a 9mm...
  5. B

    300tdi,repair to brake vacuum pump/oil leak from front cover EASY JOB

    Had no other jobs in workshop today so did couple of jobs to own car. FIRST set engine to TDC on No 1 Removed vacuum hose, 6 bolts which attach pump to block, and removed pump. Fixed to bench and drilled out the factory rivets with 5mm drillbit and lifted front cover off. underneath is a shaped...
  6. B

    anyone tried to repair 300tdi '95 brake vacuum pump ???????

    My vehicle is spewing a bit of oil from the front cover of the above pump, the cover is rivetted in place, and i expect the gasket is leaking, (not the one to the block) i was wondering if anyone had taken one apart and if so could i reseal the front cover to main body ???? the pump works well...
  7. B

    Billyloadsamud says hello from w/sussex

    Hi guys, been on other forums for years on & off, owned series,rrc's,90s, disco 200, now 300, plus jap and russian bits. Was MoT tester till 2006, then in water industry (s##t job), now starting own mechanics workshop with friends . hope i can be helpful to some Billy Oh and I don't mind a bit...
Back
Top