Search results

I had to drill new holes in mine as the holes in the top of the windscreen frame did not match up with the holes in the windscreen mounting bracket, however you shouldn't really have to if you have the correct one to fit your vehicle. If none of the holes line up then yeah, you will need to...

cheers in advance

yeah im not really sure where i could go about attaching a new bit of sheet steel to...

So after pulling the seatbox out today to make life easier when removing the gearbox, amongst doing some other bits an bobs, it transpires that the bottoms of the door pillars where the seatbox and sills mount are pretty badly corroded. seeing as its ali im not really sure the best way of...

Im affraid HandyAndy is right Check out Busters guide http://www.landyzone.co.uk/lz/f41/frame-balljoint-renewal-110342.html Gota hate forgetting how stuff came off!

Perfecto cheers

Hi guys, just a quick question, should there be any gasket or seal in between gearbox extension housing and transfer box for an lt77? i couldn't remember what i took off when the old gearbox came off and cant see any in my parts catalogue

Cheers dude, You knew the PTO would come into play at some point! 10/10 for perseverance :D

Happy days, looks like a trip round to a mates to borrow the engine hoist..............again. Having never ventured into the box before, one i get it apart, is it going to be fairly obvious which bits i'm after do you reckon? And on a separate note, the transfer box whines like a whore...

:eek: JamesMartin, are you some sort of wizard?! 4th is the only gear in which it makes no noise, i'm really hoping you are going to tell me some quick and painless fix here, however i fear the worst at this moment in time. Also, regarding the front diff, i replaced that around 2 months ago...

I dont think so, i think it may have been 3rd it was slightly better in, but will take it for a quick spin tomorrow to confirm.

So i'm driving home from work this evening and as i lift off the throttle in second gear a knocking noise starts coming from the transmission tunnel. strangely it doesn't seem to happen in every gear, but it does in the majority. Everything appears fine whilst at idle and accelerating and even...

Sorry no clue as to v8 models Oh and Dom, im in surrey, cant say i fancy heading down there to sort out another mishmash of wiring!! Just because i managed it doesnt mean to say i ever want to do it again!

Haynes manual for defender 90/110/130 there is a wiring diagram included on the second page of diagrams i believe for '86 on-wards. It isn't as daunting as you would think as long as you are methodical about things.

I've just completely re-wired my '86 90. there was so much crap in there that was either completely unnecessary, or awful patch up work from previous owners. I started from scratch with new wire where i needed it and salvaged any lengths of wire that were still good. Basically just used the...

I was getting pretty poor power to the wheels all the way home, turns out i did 90 miles with the handbrake on :doh: how the only damage all the mad caused was to snap my handbrake cable is beyond me!! Big cheers to BaggyJim for leading our group, had a really great day

Just one point, with that increased length of piping between turbo and intercooler you are going to be introducing a bit more turbo lag and slight loss of turbo pressure due to all the extra bends and length, other than that looks good and the tdi is always gona feel great after that old 2.5td!

im not sure i understand............ whats cleaning???

I bought 12 cans of matt black spray paint off ebay for 20 quid 2 summers ago, spent about 5 hours spraying up the landy, was a pretty good finish and was still looking fairly decent after a year or so. could probably do with a touch up now, but you cant really tell as the mud normally covers...

Im not sure he ment that sort of nosh..... or is that just my slightly off track mind :rolleyes: