Search results

Hi All - does any of you know where i can get a set of rear helper springs (not the air ones - the metal versions) - and is there a front kit too? Cheers G

Cheers Dom - I am based in Weybridge, Surrey would you be able to post a few pics of the guard for me? :):):)

HI all I am looking for a few parts for my def 110: 1. Standard height Heavy duty springs x 4 - (rear load 450+ Lb) 2. Heavy duty tank guard 6mm 3. Heavy duty rear anti roll bars (28mm bar diam.) 4. LR 109 Safari roof - (transport details would need to be agreed) Thanks all! GG

Hi All - I want to replace mt Britpart yellow Heavy Duty springs with a better quality part as these are really not that HD! - Does anyone have a suggestion: King Springs, Terrafirma HD medium load, Bearmach "Blue" standard height. The suspension is currently in Terrafirma Big Bores (with...

Ok - I'll ensure I keep the wheel well strapped onto the passenger seat then:)

HI All - I have finally found this thread after starting the design of my own spare wheel cradle. I have a couple of questions: 1. I want to make the wheel sit as low as possible. How low do you think it can go without fouling the rear wheel clearance on the suspension? 2. with more weight...

That's great in fact i am installing dual shocks on the rear axle - adding 2 x Def 130 HD shocks to the already installed Terrafirma Big Bore. Currently with Britpart HD yellow springs, which i am not happy with, but will try and see the overall ride. Thanks lot for responding!

Good afternoon! This is about my Defender 110 fitted with a GM Isuzu 2.8TD heavy futy engine (the version with cam gears, not cam belt), formerly a V8. The vehicle in time has undergone many different installations of lights and other electrical devices, to the point that it does now require a...

Hi there just only saw this one - apologies - the best configuration - depending on the state of the engine is with the 5 speed LT85 + LT230 Disco box 1:1,222 (mine) - or even the Range rover longer one - At present with that engine I cruise at apprx 70MPH and return apprx 30 / 34 MPG depending...

Good afternoon all - advice please on 2 topics :) :) :) Vehicle: 1987 Defender 110 SW, rear salisbury axle on drums + spacers to run Deep dish alloys, currently running Terrafirma big bores standard height + Britpart yellow HD springs 1. I want to install front anti roll bars: I know I...

All hydraulics rod & pedal adjustments have been checked - all ok. I am told unlikely oil seeping in, also, 2yrs ago when replaced clutch, the old one was shot but bone dry. Another possible cause may be the fact that the engine (slighly tweaked 2.8 Isuzu TD on LT85 / LT230 Disco boxes +...

Dear all - trhanks for responding so quickly - I am reviewing this with my specialist tomorrow morning prior to leaving for a new 2k miles round trip tomorrow (isn't always the case!!!!) Thanks all! GG

Hi All - the Clutch on my Def 110 seems to have started slipping - I had a new one installed last summer - all well, and it has been treated very well. Today had a mini service done, checked all levels (incl. clutch) - then driving back from specizlist, the clutch started slipping in 4th & 5th...

Dear Station House thanks in advance for your reply:):):):):) - I am on it! Failing some of the basic interventions I am buying a high capacity USB key so I can listen to music for the 13 hrs drive until I get there :eek:

Hi All - my Def 110 SW stereo has developed a (new) issue. When I switch the headlights on, the radio signal reception becomes very messy and confused - to the point that I cannot drive an night AND listen to the radio. I got used to a slightbacground noise when fans or wipers are on - but this...

Afternoon all - I am looking for the Def TD5 bulkhead internal sound deadening strip. This is the one that is riveted horizontally across the inner wall of the bulkhead just behind the lower dashboard tray. Has anyone got this or can suggest which exact material is made of so at worst i...

I have replaced my entire 1987 V8 dashboard with a 2002 TD 5 one no problem (3 hrs work excl. wiring). The following year I had the bulkhead replaced with a TD one, again no problem. My specialist advised me against attempting to replace an earlier TD5 dashboard with the TDCi unless a major...

Thanks folks - what I am actually after is a diagram showing the actual values that need to be met to pass the UK etc - :):):)

Hi All - My Def is about to come back to UK after a long long long stay South Europe - In order not to be stopped by local police everywhere I had to change the settings of its headlights to meet Italian laws. The vehicle is due back to the UK in 2 weeks, and due for the MOT, however I want to...

All - on my 1987 Def 110 I have done the following: 1. Bulkhead, seatbox, gear tunnel front & 2nd row footwell + behind dashboard, all load area: Autoleads sticky sound deadening from Halfords (you car will look like the interior of a seventies russian space ship) 2. On top of it everywhere -...