Search results

Hello all. Are going to by new shock's all around. just driving on "ordinary" roads. Can get OEM at FF for £35 a piece, Monroes at £32, while J. Craddoks can offer "no name" shocks for £18.50 a piece. (+VAT) Anybody who has any experience with the Craddok shocks? What manufacture are they? I...

The sub is still working, but now after another" Engine Disabled" everything is back to normal???? tomcat59alan, check out this site: http://www.simplyspeakers.com/ You may find something to use for repairing your speaker. L

Have the Harman K. system with steering wheel controls and rear sub woof. The other day I parked the car on the "wrong" side of the fuel pump, between the pump and the station, probably in the wifi beam for the communication with the cash counter. When I forget myself and do this the car will...

You know I haven't even considered asking the local stealer for a price. Not since I had to buy the small 8 mm screw that holds the rotor to the hub: 9£ and it was not even made of gold. Sometimes it may even be worth getting on a plane to LON and then import the parts myself. Can get a plane...

Hello P38 2001 Does anybody know the dimensions and type of the outer oil seal in the rear axle? I should like to source locally, since DHL charges 20£ just to handle the paperwork for the shipment upon arriving in Norway even if the seal only cost 6.99£ at FF. Would rather save that handling...

Hi AJB2494 Looking at your video, its looks very similar to my motor a few months ago. Same symptoms, same sound, same smoke.... More about it here: https://www.landyzone.co.uk/land-rover/terrible-sound-from-the-engine.283038/ and here. https://www.landyzone.co.uk/posts/3527653/ My motor had...

Got it all together and timed up right. THE ENGINE IS WORKING!!!!!! Static timing first at 0.90mm, but changed that to 0.95mm after reading a note by Wammers (new chains same as motor gone less than 20K) This gave me first a timing modulation on idle about 67 and not much below even when...

I put a dial gauge on no 1 piston and moved the crankshaft as much as the timing pin would allow. The piston moved 0.5 mm up and down. Measured the timing pin, and it is slightly smaller than indicated by Wammers in another tread. Spigot is 7.67mm (7.89) probably what gives the movement...

All ready for the final assembling. Would be nice if somebody could have a brief glance at the picture and tell me if I am on the right track. Have been off with the head after loosing the timing. Luckily the valves are still good. Have had a check of the valves and the head. Have lost...

Then the nut has been found, it was still in place, but so rounded by a previous mechanic's attempt to remove it. Had to take off the tube that is the base of the tensioner to see it. Then it came lose with some gentle persuasion

I am going to take down the front cover and replace the chains. Following RAVE when coming to the point where the FIP Sprocket are to be kept in place by the tool, but first to remove the FIP nut, I am not able to find any nut!!!! See point #16 in the attachment. Has the nut come loose and...

If my wife uses her Blackberry phone while seated in the front passenger seat, the EAS goes bananas after 10 sec. So she is expelled to the back seat if she want to surf the WWW while we are driving. Iphones are not that bad, usually takes about 2-4 minutes of surfing before the EAS gets it...

P38, 2001 model with BMW diesel, 150 000 km: A few days ago with a lukewarm engine I tried to start the engine, but by mistake pulled back the ignition key just when the starter motor engaged. I then did a proper starting sequence and the engine started, but with a rattling sound as if all...