Search results

I have seen the perfect disco 11 for me except it has only 5 seats. Can the extra 2 be retro fitted it is a 2002 (is this face lift) and it ticks all the boxes for me Low Milelage,Service History, Not off roaded,1 owner and a great colour. Your help greatly appreciated. Tony

Thanks for the advice. All sorted off greenlaning the weekend around the Brecons. Tony

Thanks for the info. I keep forgetting the search function on forums. Regards Tony

I have seen a Disco 2 for sale locally its a 2002 TD5. Any advice what to look out for. Thanks In advance Tony

Thanks for the info I have it right in my head now. Sorry for being dim. I will put it all back together tonight ready for the re test. So by the weekend Road Tax and I will be touring the Brecon Becons. Thanks Tony

I changed the Voltage Regulator and checked the earths on the engine bay side of the bulkhead and all worked fine

This is a link showing the oil seal. RTC3510 Hub Oil Seal - Detailed item view - Land Rover Orphanage Parts, Spares & Accessories If you turn it over it shows a groove. So the question is should the smooth surface (as shown) face the road wheel or should the groove face the road wheel facing...

here is the drawing

Dear Landybloke Thanks for the reply just to confirm. Should the seal on the left have the flat side facing the road wheel or have the lip facing the road wheel. I have attached a drawing. Thanks for the help much appreciated. Regards Tony

I have just had MOT and only failed on front wheel bearings so very pleased. I now have all the bits and re test booked for Wed pm so need to get in done tonight. My question is regarding the oil seal which way should it face with the lip inwards to the centre of the axle.vechile or outwards...

I took mine off last year and it has not been back on the kids love it. I did the same as you on the belts. Enjoy the summer. Tony

Its the red & black sockets on the dash to the left of the steering wheel. Thanks for the replies guys will check out Maplins.

Does anyone know the correct connectors to buy for the Inspection Lamp Socket. In addition to running a light would it be ok for general use like a cigerette lighter power source. Mobile phone etc. Thanks in advance Tony

Having re read the post you are reffering to the O ring on the FWH yes you should be able to pick these up. Remember to be careful when dismantling not to break the plastic locking strip. I understand these are near impossible to find. Regards Tony

I have just replaced the oil seal on my front hub and the oil was in the Fairey FWH. Once I changed the oil seal on the hub I cleaned out the hub and re greased it and put it back on. I would suggest the oil is coming from the hub oil seal. @Others may know more as I am a newbie. Tony

Dear fenby Hope you are ok thanks for the reply do you have a map referance for Forest Lodge to help me keep on track. Planning to get the MOT this week once sorted out a few gremlins. Since we met I ran around most of last summer and it went well. I did not do anything serious so looking to...

Only a couple of electrical jobs to do and I think I have found the answer on here. Clean the earths. Thanks again all

Just to let you know all went fine on the FWH I found on the hub a lead in slot to put the locking plastic strap and it went back without breaking it. Now all I need is to sort out a couple of electrical issues and down to the MOT station. Thanks for the help over the past couple of months. Tony

The 'Snake' looks like a cable tie but without the locking bit but with a washer type at the end. Thanks Tony

With much help from here I have carried out many jobs in the last few weeks. So many thanks to all. However I have one more question honest ??? I am now putting the FWH back on and happy to say all engages and works fine. Now the problem do I put the plastic snake in before I assemble or do I...