Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. stumpyj

    What have you done on your 90/110/130 today?

    Finally finished the door card and dash refurb. Really pleased with the vinyl dye spray that I used. Door cards had all the clips replaced. A very enjoyable job. The eagle eyed out there might notice the use of wing eyebrow clips for the fascia fixings. I thought I would make the cabin more...
  2. stumpyj

    What have you done on your 90/110/130 today?

    I took off the TD5 starter (a lot easier than I thought it was going to be) and got it on the bench. I then replaced all the all the connectors inside. Dead easy job. I had been getting an intermittent click with the starter. However it turns out that whilst the connectors were worn and probably...
  3. stumpyj

    Wipers, Wormgear & Wheelboxes

    IS the wormgear the same as the cable that runs from the motor through the wheelbox? If it isnt then you definitely need to replace that as its the main culprit in all of the wiper issues. Genuine landrover wiper boxes are much better as well. I would replace the relay on the bulkhead and also...
  4. stumpyj

    Defender TD5 MAF readings

    Hi Shrubby - I just fitted a Britpart one, its about £12. I've pretty much done a full restoration on my TD5 Defender so I have had to make some choices on whether to go genuine or Britpart/Bearmach purely based on price and value for money. My thinking here was that the part is really easy to...
  5. stumpyj

    Windscreen and seal replacement, top bulkhead void.

    I had the same issues with water ingress into the footwells. The fact that Landrover produced a workshop manual to reduce or repair leak is quite appropriate https://www.landroverweb.com/Pdf-files/Manuals/Land_Rover_Defender_Water_Ingress_Manual.pdf credit to western at landroverweb. After I...
  6. stumpyj

    What have you done on your 90/110/130 today?

    Fitted a new MAF sensor, cleaned MAP sensor, took the door cards off and replaced all the wee black grommit things and cleaned then ready for a spray with light grey vinyl paint. Removed all the door locks ready for replacement when they arrive. Took the back door lock and handle mechanism off...
  7. stumpyj

    Defender TD5 MAF readings

    I've just fitted a new MAF to my defender TD5. The readings were zero previously so I figured it was finished. Fitted a new one and I get about the same readings as you. A massive difference in performance for me on low end pick up.
  8. stumpyj

    Bloody Wipers.

    Sounds like the wheel box. If the gap between the cog and the lip on the wheel box is too big it will allow the cale to run through but not engage properly and so there will be a slop on the wipers. I fitted a genuine wheel box and a britpart one. The britpart one just need a very slight bend in...
  9. stumpyj

    Windscreen and seal replacement, top bulkhead void.

    Hi Graham I have just replace my Defender windscreen seal. I got some advice from a mate that is a professional windscreen fitter first. Basically I just cut away the old seal from the outside and then needed to do the same from inside and the glass came out easily enough. I then cleaned the...
  10. stumpyj

    Facia Grommet things

    Cheers - ordered!
  11. stumpyj

    Facia Grommet things

    For some bizarre reason, as part of me replacing the door lock barrels I have decided to refurbish the door cards for my Defender. Im going to clean and then vinyl dye them as close to the colour as possible. When I was messing about last night I decided to take off the dash (for the 5th time!)...
  12. stumpyj

    Glow Plug Relay TD5

    Thanks for the help Mystery. I gave up looking for a relay that was the same as the Glow Plug Relay that i had ordered. I looked everywhere. In the end I stuck a relay into the plug tht was empty under the drivers side seat. Ran the diagnostic check and the fault code came off. I have a pscan...
  13. stumpyj

    Wiper issue

    As Flossie said. Replace both at the same time, as taking the dash off twice when the other onegoes will be annoying. Don't fiddle with the grub screw on the spindle, just cut them off as you are replacing them as part of the wiper box. I had to fit a Britpart one and a genuine one as my local...
  14. stumpyj

    Glow Plug Relay TD5

    Thanks Scooby. Ill check this when I go on the Glow Plug Relay hunt later!
  15. stumpyj

    Glow Plug Relay TD5

    Ok - so I've established that the Glow Plug Relay insnt under the RH seat as its supposed to be, and so now I will just have to trace the wires back from the glow plugs (Ive checked some previous posts on here and someone had exactly the same problem but wasn't resolved. My 1999MY doesn't have...
  16. stumpyj

    Glow Plug Relay TD5

    Hi everyone As with everything on this rebuild I went to change the GlowPlug Relay which is located under the passenger seat, and guess what? Yup, no relays under the seat! Does anyone know where the relay could be? I did find a connector which didnt have a relay but didnt have the same...
  17. stumpyj

    New body panels - Front wings

    Hi mate I got a great pair from Gumtree for £80, so they definitely do come up. Theres a couple of Defenders breaking on Ebay, so the wings are out there.
  18. stumpyj

    Damned Wipers..

    Hi Mate I feel your pain. I had similar issues and basically chased them until I just decided to replace the lot. I replaced the two wiper boxes with the spindles on, the wiper cable, wiper motor, intermittent switch and relay. Now the wipers work exactly as they should. The cost wasn't too bad...
  19. stumpyj

    Glow Plug Relay TD5

    Hi everyone I've just done a diagnostic check of my 2000 TD5 and apart from the usual errors relating to options that I don't have for air con and abs, there are two codes 3070 and 3103 which are "Glow plug relay drive open load active". Landy starts no problem and I suppose just because I'm...
  20. stumpyj

    Erratic TD5 Fuel Gauge

    Hi everyone Over the last few days my fuel gauge has been showing the wrong reading sometimes and the correct reading others. What i mean by this is when I turn the ignition switch it either; goes straight to the correct level and "behaves" as normal and goes down depending on distance goes to...
Back
Top