Search results

Front cover on, pump pin aligned before doing anything. I will probably break it all down and align everything with new belt to be sure.

Hi again, I have finally got round to ditching my EDC pump for mechanical. I have changed to pump with the locking tool but the crank pin will no fit. The flywheel slot for the pin is visible in the big hole under the blanking cover, so am I correct in thinking that the crank is mistimed but...

Decided not to use pop rivets to put rear windows in. Used M4 flanged head bolts and the filler still fitted fine. https://flic.kr/p/DF33nN

Has anyone done a good cheap reversing camera in their 90/110? I am doing a big rebuild and most money is already set aside to finish it but I would like to do a reversing camera during rebuild but funds are tight, any advice or recommendations?

As some of you know I am making a 110 Auto using a 300Tdi Disco engine and box. I need to replumb the trans fluid cooler but don't know where to get fittings. I have search but can't seem to find what I need, has anyone replumbed their auto trans cooler?

Is it a pain or just a simple string job?

Moving on at a pace. Went to paintshop today and I have to say it is looking good, real good. https://www.flickr.com/photos/130401096@N08/shares/8Q320J

Hi I am looking for a good Heater to suit a 1988ish LR. I was going to refurb my own but don't have time. Can collect if not too far from North Wales / Chester area. Cheers.

Cheers

Hi again, does anyone know of a spare wheel carrier that doesn't need lots of holes in the rear door. I see some swing away carriers have plates to put in the door then I assume an attachment through the door to the carrier. Show me yours? Cheers

Did the same search but didn't see any clear views on the bottle and where the lower mount goes. Cheers

Cheers Any photos of installed bottle?

Can someone tell me if the expansion bottle on a 300Tdi Defender is the same as a Disco? Can someone post a photo of it in position? Cheers

What are seat belt bars? I thought they just bolted to the floor?

i am going to replace the covering on my headlining sections, what have people used for material? I was considering black vinyl because I have some but it might end up a bit dark and gloomy?? Please show me yours.

Looking for a pair of side steps in the North West / North Wales area. What have you got?

looking for a pair of 110 3 man bench seats with fixing in the North West / North Wales Area.

Can I jump onto this post too? Need to wire in a plug for trailer lights, can I just piggy back into the standard wiring or do I need to get one of those fancy boxes? P.S. For info my rear loom is in the back of my other car, so anything is possible!!

Further to this post, I have the standard auto oil cooler and want to plum it in using flexible hoses. Where can I get the M16 fittings to attach to the box and cooler? And then piping to suit?

got an email today for their Boxing Day sale. Upto 65% off everything code XMAS Triple QX 5w40 Fully synthetic 5 litre buy one get one free for £19.43 code FREEOIL2 Triple QX 5w30 Fully synthetic 5 litre buy one get one free for £34.74 code FREEOIL3 Triple QX 10w40 Semi synthetic 5 litre...