Search results

Haha I was just thinking, I'm sure there's only one lol Dan

Do the half shafts just pull out the ends? And I will look into it! Cheers

I have this same problem but when I checked the ujs they were solid, the play feels like it's inside the axle, any ideas? Cheers Dan

300tdi and they all say mineral is best but don't use fully synthetic never owt about semi lol Cheers Dan

Hahaha I might buy a set just incase I get a disco lol, and not sure think it was probably just down to been needed and I think maybe done some wading before as it was full of mud inside the cover! And I went with the dayco/britpart kit just goner keep an eye on it to see if she lasts! I thought...

Apparently makes them run better! Dan

I've seen many posts about using 2stroke but everyone recommends mineral oil, so I was just wondering if semi-synthetic was any good as we use loads of it at work so would save me buying lol:rolleyes: Any advice would be appreciated Cheers Dan

I had similar but smoke was more black! I advanced the pump slightly, now it's perfect! Dan

Well it's all back together and touch wood seems fine! I'll let you know if it breaks anytime soon lol! Dan

Got mine today so goner get it wired up tomoz hopefully! Does anyone know how they actually work as I was told txt to track it and ring to listen into the cab! But the instruction say ring to track and nothing about the microphone? Cheers Dan

Brill that's cleared that up thanks a lot Dan

Cheers bud are they all the same?

Cheers bud been told 10w40 mostly so will go with that for the engine! Just need to sort diffs out now. Cheers

I know this as probably been covered before but all the searching I've done seem to contradict each other! Every time I ask a shop for coolant for 300tsi they say orange but internet says not to! Can anyone clear this up for me please? Also what oil would the engine want and the 300 gearbox...

Tiger seal is like tie wraps and gaffa tape! If you can't mend it with these^^^ your not using enough lol! Dan

Does anybody know about a shim that the pushrod sits in? I've just been told that if you don't pull the rods out in a specific way the shins drop down into the sump! Is this correct? Also what's the best way to check if there still there? Cheers Dan

Will do bud cheers! Well managed to get the bottom pulley out what a ba***rd that was lol! Didn't manage to get the belt kit today though but did remove the pushrods and they are definitely bent, they been changed now and hopefully belt will be on Monday and then just hope there is no other...

What was needed to be done to fit the rangie rear seats in the front? Like the idea of that! Cheers Dan

If there was a problem with the servo, surely the pedal would just be hard, not travelling too far! Have you checked that all your hoses are fine? Could be as simple as a bad hose swelling under pressure! Dan

He said the later type was the expensive one at 30 lol it's a dayco set so hopefully it's got one In! I'll find out in the morning I suppose lol! Cheers Dan